Pioneer Wired remote control

**ray_t** · 03-26-2009, 10:30 AM

Thanks for your continued help mate. I have already turned on the AUX option in the menu. I can manually switch between radio - cd - aux using the source select on the HU with no problems.

I have not as yet tried any other resistor values, only the 2.2k as this is the main one I need. Volume + and - would be nice but not essential as I can control that from Centrafuse. As soon as I get home from work I will try a few other values.

**ray_t** · 03-26-2009, 04:38 PM

Well, I just tried a few different resistor values and still nothing. Begining to think it will never work.

Can anyone suggest another way of being able to control the 'source' and volume from the front of my car???

If not, can anyone suggest another HU that comes with aux in and a hard wired remote???

**bnwgraaf** · 03-26-2009, 04:44 PM

I am sorry, that it doesn't seem to work out for you....

If I got another idea, I will let it know.

Good luck with finding another way....

Branko.

**JVDE** · 04-23-2009, 04:48 AM

Hello,

I am planning to build my own steering wheel controls, and this thread was just what I needed!

Today I measured out the jack. seems like it's 2x5V DC. Using the base of the jack as negative.

I have tried some resistors with succes! connecting between the base and the tip if the jack. What the center part does I'm not very sure...

Anyway, It works! Now I just need to go and buy some right resistors. I will try the Ohm values from this thread.

Thanks to everyone!

**JVDE** · 04-23-2009, 06:48 PM

I will go and buy a potentiometer tomorow 0-100k Ohms

starting from 0 ohm all the way to 100k ohm. In steps off 1k ohm

I think that will do the trick.

**JVDE** · 05-07-2009, 04:11 AM

Ok I did it!

here is a nice tabel I've made:

http://www.jvde.net/pioneer_wired_re...red_remote.htm

It works on my 7900ub!
thanks once again to everyone in this thread!!

Share this!

Jeroen

**Tyrekicker** · 05-27-2009, 10:39 PM

I've solved.

As I told, I have a corsa C, and I've replaced my steering wheel, for other steering with stereo buttons, it have 3 wires:
- brown, connected to ground
- gray conected to 3.5mm connector
- red/blue connected to antena signal

The red/blue brinds positive energy to turn on lightnin on buttons, and it turns on when the stereo turns on.

I've replaced some resistors with the recommended values.

**extraaha** · 05-28-2009, 07:05 PM

It is resistive.
directly connect it to CarPC JoyCon.

**JVDE** · 07-26-2009, 08:24 AM

I've made a video of all working functions!

[media]http://www.youtube.com/watch?v=0FDiZCJ6ulI[/media]

**Tyrekicker** · 07-26-2009, 08:39 AM

Hi JVDE,

You are the indicated person, I thought I´ve solved the issue by myself, but now, I´m having some malfunction, please could you help me with a diagram of how you´re connecting this three wires, and how resistors and switches are dispossed on you project board? Please let me how the resistor values whic you´re using.

Thanks in advance by your kind help,

Tyrekicker
Radical Tuning Car Quito