3m upgrades

**changeip** · 08-31-2007, 12:52 PM

Again, I should have 50 sheets of BEFII arriving today. I plan to sell these to members one by one since I will only need 1-2 myself. I believe they are 17x17" as well.

The Xenarc 700TSV existing internal films are 94mm x 155mm (+/- .5mm). I am still trying to determine if the 500nit 700TSV already has BEFII sheets in it... it sure seems like they do which would make doing the upgrade useless.

Sam

**Homebrew** · 08-31-2007, 01:39 PM

My apologies Sam if it seemed like I was stepping on your toes. I was just throwing the info out there for people, wasn't trying to steer them from buying from you. I know you don't want to get stuck with all of it. I just wanted to make sure people had the ability to get it if they wanted it bad enough.

-Kevin

**changeip** · 08-31-2007, 01:42 PM

Originally Posted by Homebrew

My apologies Sam if it seemed like I was stepping on your toes. I was just throwing the info out there for people, wasn't trying to steer them from buying from you. I know you don't want to get stuck with all of it. I just wanted to make sure people had the ability to get it if they wanted it bad enough.

-Kevin

totally have no problems with that. im just tryin to help out fellow users. seems like this stuff is hard to find so i wanted to make some available.

**Phatsacks** · 08-31-2007, 02:05 PM

Kevin

I just got the replacement film (so an extra BEF II 90/50), and I got a 15" ARMR-200

Was I suppose to request the ARM-200?

**Homebrew** · 08-31-2007, 02:13 PM

Originally Posted by Phatsacks

Kevin

I just got the replacement film (so an extra BEF II 90/50), and I got a 15" ARMR-200

Was I suppose to request the ARM-200?

No you're good. It sounds like it should be placed on the outside of the screen, in which case the ARMR-200(or the ARMP-200 if you'd prefer it permanent) would be needed. However if it can be used on top of the LCD, but underneath the touchscreen, then ARM-200 is acceptable. The only difference I can see is that ARMP and ARMR use adhesive for mounting.

-Kevin

**Phatsacks** · 08-31-2007, 02:18 PM

Once I know what screen I'm buying (Depending on changeip's DIY guide/video), I will either have left over films, or all of it up for grabs.

**mygti02** · 08-31-2007, 03:17 PM

sorry i guess im confused on how this was mounted. do you stick it to the actual screen or does it hover over it and just stick on the metal trim around the actual LCD?

**PhatMo** · 08-31-2007, 04:30 PM

From what I see and from my testing, the ARMR-200 works best on top of the touch panel. It doubles as a screen protector. Just as Kevin said, the ARMR-200 is removable and the ARMP-200 is permanent (Thats where the R and P comes from).

**Snortonnorton** · 08-31-2007, 04:38 PM

I believe that basicly, yes.

the transreflective screens simply have this stuff.

BUT, THE MORE EXPENSIVE BRANDS LIKE XENARC HAVE MORE BRIGHTNESS TO BEGIN WITH. 600 VS 350 AS THE LILLIPUT BRIGHTNESS.

do it's a combination of the two.

**PhatMo** · 08-31-2007, 05:10 PM

hmmm I am having a hard time figuring out how to rotate the film for installing. Which side should the notch be on forthe DBEFII 45 Degrees? It changes soo much as you rotate it.