3m upgrades

**changeip** · 08-29-2007, 11:44 AM

High bright LEDs show they still use BEF and DBEF:
http://www.lumileds.com/pdfs/TP39_US_FPD_2004.PDF <- see 'cross section' graphic a few pages in.

I also ran across a Phillips ( I think ) 1000nit screen that compared to normal technology, and it also listed standard BEF and DBEF-D400 applications. I can't find that URL again, sorry.

From http://www.lgphilips-lcd.com/homeCon...ec=E&kinds=IN1

"The company’s medium-size displays will include 7- and 8-inch displays for automotive use, including 1,000 nit high brightness displays and Dual Screen with One Panel (DSOP) displays that allow drivers to see one image and passengers to see another one on a single screen. Another featured product category will be panels for portable navigation systems ranging in size from 3.5 to 7 inches. These panels are driven by a single chip solution that allows end user products with narrower bezels to be created."

**Zeeshan0581** · 08-29-2007, 12:30 PM

ok i ordered the samples yesterday, and i got a email from them asking me this:

To ensure we send samples that will meet your needs, please send details re:

* Type of display
* Expected volume
* Films currently in the display
* End use application
* Panel type (i.e. transmissive, transflective)

Thank you.

Did anyone else get this?
I have a Lilliput 619
someone wanna help me out in answering this email??

**Cheekz185** · 08-29-2007, 01:44 PM

Hey I never got any email from them what so ever... They just shipped me the samples...

**Zeeshan0581** · 08-29-2007, 02:00 PM

so why are they emailing me, i dont understand...

**PhatMo** · 08-29-2007, 02:13 PM

Yea I have had these samples for a couple of months now and I havnt had a chance to install it yet. I am excited tho after hearing how it turned out

**changeip** · 08-29-2007, 02:20 PM

okay ... so I'm in the middle of videoing the upgrade procedure and find something odd. I'm using a new Xenarc 700TSV to show the process. After removing the LCD panel I find 3-4 films already installed. The top one looks like a diffuser or something simple, however the 2 underneath look like Vikuiti films already - both are similiar but I can see one at 0 degrees and another at 90 degrees. I wonder if this Xenarc already has the same film installed. I have emailed Xenarc to see if I can get an answer on which films they integrated already.

**Beezer** · 08-29-2007, 03:24 PM

Originally Posted by Zeeshan0581

so why are they emailing me, i dont understand...

I think they are wising up to the fact that lots of enthusiasts are requesting samples. After all, the purpose of sending samples is to assist sales. I doubt any of us are going to buy 1000's of these things.

**Phatsacks** · 08-29-2007, 03:58 PM

Originally Posted by changeip

okay ... so I'm in the middle of videoing the upgrade procedure and find something odd. I'm using a new Xenarc 700TSV to show the process. After removing the LCD panel I find 3-4 films already installed. The top one looks like a diffuser or something simple, however the 2 underneath look like Vikuiti films already - both are similiar but I can see one at 0 degrees and another at 90 degrees. I wonder if this Xenarc already has the same film installed. I have emailed Xenarc to see if I can get an answer on which films they integrated already.

changeip -

would adding the Vikuiti films before the installed Xenarc, be detrimental in some form, in addition to the installed ones?

**MatrixPC** · 08-29-2007, 05:16 PM

Originally Posted by changeip

So last night I decided to give the 3M (Vikuiti) products a shot on my lilliput 701. Previously I could not even see the screen in the sunlight while driving, and now after the upgrade I'm happy to say that it worked wonders!

I layered a BEF II 90/50 and DBEF E film behind the LCD panel and it totally helped. Didn't seem to make much of a difference with brightness, however it's much better in the sun, actually still visible in direct sunlight. I swear the aliens made this stuff, there's no way this is made here on earth. : )

http://multimedia.mmm.com/mws/mediaw...66g5ECOrrrrQ-&
and
http://multimedia.mmm.com/mws/mediaw...66GZACOrrrrQ-&

Those 2 films, based on free samples, and 2 hours time I now have an great screen in my truck now.

My question is this ... when someone purchases a 'transflective' upgrade, what films are typically used? This same 3M product or something else ?

PS - gloves and patience definately required.

Sam

Look like a nice result.
Got a question for you regarding to the installation of the films.
Can you specify what layer should be on top of the other?
TS - LCD Panel - BEF - DBEF - Defuser layer - backlight .... Is that the order?

BTW, For those who had order them. I did request sample from them before but they didn't give it to me. Instead, they send me the product cost and dealer where to buy them. It's probably because I used a wrong link to contact them (Inquiry instead of product sample).
However, I recently requests sample from them again. Without any info, the package just show up in my mail box within a week. The stupid postman fold it up and stuck in the mail box. I also ordered some DBEF film from fleebay.
I think the main reason they email to ask for more info is because you guys probably writing an essay in the "short description of your application". For me, I just put "enhance brightness of existing mobile multimedia display". Short and get to the point. Also the volume of "sample order" has significantly increase over the past week trigger their decision.

Now I need to find time to put the thing in.

**PhatMo** · 08-29-2007, 06:45 PM

Hey I have:

BEF III 90/50-T
DBEF II 45 Degrees
ESR

Does anyone know how to orient these films for our use? I notice that rotating the polarized films drastically changes the visibility of the screen. Damn I cant wait for that procedure video!