double din frame for the eby701

**americasfuture2** · 05-21-2008, 10:17 PM

Originally Posted by ContaiN

If I was too obscure by just saying "the store", I meant the mp3car store. Link here.
http://store.mp3car.com/7_Touchscree..._p/mon-028.htm

Don't worry that it lists them for 619/629, works perfect with a 701

i misunderstood you, i thought you ment there was replacement screens as well as replacement touch panels.

cant wait to start seeing these help cars look clean.

i just realized a problem i am going to have. i bought my car so base model, it doesnt even have ac. and with these hot oklahoma summers, and a pc's heat, i dont think it will play out so well. i am going to research this issue.

**wjc04wrx** · 05-21-2008, 11:03 PM

I wanted to purchase one of these but I was turned away by the fact that you have to double-side tape the screen onto the kit. I know that people are going to want to remove them or align them wrong and will have to shatter the screen in order to get it off. Now, if they come with a solution that does away with the tape, I would go for it. This will especially be a deal breaker with people with transflective screens, they won't like the idea of a shatter screen

**americasfuture2** · 05-21-2008, 11:07 PM

im not going to use that tape in the front. theres some of the tape on the tabs you can fold over and use to secure it by the plastic. that is my way of making it to be able to be readjusted if need be. it help in place just by test fitting it and leaving the film cover on.

**r3volver** · 05-22-2008, 10:23 AM

I noticed from the specs they have listed it looks like they're selling the older version of the 629. Do you think the 2008 629 fits their frame? Or might it have the same problem as the WRX kit?

**americasfuture2** · 05-22-2008, 11:37 AM

look into if the older 629's physically changed any in screen and board sizes

**RyanB95** · 05-22-2008, 06:26 PM

Originally Posted by ContaiN

If I was too obscure by just saying "the store", I meant the mp3car store. Link here.
http://store.mp3car.com/7_Touchscree..._p/mon-028.htm

Don't worry that it lists them for 619/629, works perfect with a 701

Wait, the touchscreen replacement in the mp3car store works fine with the 701? Have you confirmed this for sure? Did you do this yourself? If so I need to order one up right now.

**RyanB95** · 05-22-2008, 11:55 PM

Just ordered up a frame too.

**ContaiN** · 05-23-2008, 07:20 PM

Originally Posted by RyanB95

Wait, the touchscreen replacement in the mp3car store works fine with the 701? Have you confirmed this for sure? Did you do this yourself? If so I need to order one up right now.

Confirmed, I'm using that replacement right now in my car.

**galvitron** · 05-23-2008, 07:27 PM

I bought his full double din kit and took the 629 out of my Mekatronics kit and put it in this new one. It fits fine and looks to be a good solution for me. I think I have a slighly older 629...

My only complaint is that the little tabs seem like a flimsy way to hold the screen and circuit board. I put some strips of electrical tape on the controller board to act as insulation and then I used some puffy double sided tape to act as a barrier against the LCD and controller board from rattling against each other.

Then I have to tap and drill the holes for my Commell board and I think it will work nicely.

**RyanB95** · 06-02-2008, 04:56 PM

Got mine today - Looks like a real quality product if you ask me. Came in nice packaging and whatnot. Here's some pictures:

Red strips are double-sided foam tape to better secure the Touchscreen:

Side shot:

LCD held in place, looks like it will be a nice fit:

Back side:

Came with all screws necessary plus some extra tape:

And lots of business cards:

I'll post some more pictures once I get my replacement touchscreen in. It should be here tomorrow so I should have pictures up tomorrow.

I'm happy with it so far!!