Dynamix LCD "no input signal"
I'm experiencing some difficulty with my car lcd monitor after I replaced my old mobo with a new one.
This is the situation:
The LCD works fine with old mobo and with notebook too but says "no input signal" when connected to the new mobo;
The new mobo works well with my 22" home lcd monitor and tested succesfully also with a 17" CRT monitor;
So, the car lcd monitor seems to be OK and the new mobo also seems to be OK but... I'm unable to have these items working well together :confused:
Moreover the lcd turns off when no signal is detected. banghead
Maybe the new mobo have a little vga signal so that the lcd in car can't detect it correctly; :suspicious: or maybe the car's lcd monitor have a high vga signal threshold so that is unable to detect the vga signal from the new mobo... :pout: Really don't know!
Is there some way to get rid of this annoying message from the lcd? Is there some way to deactivate, even if in hardware, the detection of vga signal so that the lcd stay on regardless of vga signal?
Alternatively, there's some way to "amplify" the output signal from the motherboard so that the lcd monitor can detect the signal correctly and stay on? Is there a way to know exactly which signal (and correspondant pin on vga connector) is tested by the monitor to decide if "no vga signal" or to turn on and display what is receiving?
Many thanks in advance to all for the help and for any advice!