HP Laptop LCD Exstension issue
Hope someone can shed some light on my issue.
K so i am trying to extend my LCD from my hp laptop.
I went through wire by wire and soldiered and taped/ Shrunk the exposed wires, all went fine till i got to one of the green wires, when extending it on the cable there was no video but when hooked back up video was back, so i tested the second one which was yellow and same issue, these wires are for the image on the LCD, there are about 8 of them i noticed that they are twisted together in pairs. Kinda weird but ok so i tried it and still same issue. i took a multimeter to every wire and there are no shorts and the current is flowing through the wire fine so i tested with other wires with same issue, it seems to be a length issue but i cannot find any reason why it would be a issue, the wires are extended right at the connector.
The inverter is on the lcd as well so that is not the issue either.
Anyone have any ideas????????http://www.mp3car.com/vbulletin/imag.../deadhorse.gif