Results 1 to 5 of 5

Thread: Matrox Millenium 4MB PCI, lcd controller?

  1. #1
    Constant Bitrate Seabass's Avatar
    Join Date
    May 2003
    Posts
    198

    Matrox Millenium 4MB PCI, lcd controller?

    Hey everyone, i have this old pci Matrox Millenium 4MB from my friends computer, and i know some of the matrox's have a onboard crappy lcd controller(dont care if it sucks) but i was wondering if this also has a onboard lcd controller, and what panels does it support? Thnx everyone.
    -Seabass

  2. #2
    Constant Bitrate Seabass's Avatar
    Join Date
    May 2003
    Posts
    198
    btw heres how it looks, its exactly the same as this

    http://cgi.ebay.com/ws/eBayISAPI.dll...&category=3762

  3. #3
    Low Bitrate
    Join Date
    Mar 2003
    Location
    UK
    Posts
    78
    I have one of these at the mo with the rainbow runner add-on running my PSone LCD
    But Iím using the VGA output on it.

    But Iíve never hard of an lcd controller on it

  4. #4
    Low Bitrate
    Join Date
    Jun 2002
    Location
    UK
    Posts
    65
    It looks like the card has Digital Video Interface (DVI) , but that is for modern lcd monitors and will not drive your average lcd from a laptop without a converter board (expensive). Some newer laptops use a simlar interface , but I have not seen one yet. One advantage is you get an all digital interface with one thin long cable.

    Dave

  5. #5
    BcG
    BcG is offline
    Newbie
    Join Date
    May 2003
    Posts
    3
    Hi,
    This is my first post, please forgive my lack of knowledge on the subject , but I think I found something important.

    Look at these two matrox flat panel add-on cards . The one for the Millenium G400 series uses a DVI-D connector (page5 on the link)

    http://www.matrox.com/mga/support/us...0/fpg4_eng.pdf


    But the Add-on card for the Millenium G200 series cards uses either a P&D connector(30 pin) or a MDR-20(20 pin) connector (page4)

    http://www.matrox.com/mga/support/us...200/fp_eng.pdf

    And the connector pinouts for the G200 Flat Panel Add-On card are on pages 13-14

    Is it possible to use an LVDS compatible LCD screen with this card?

    Thanks

    Cem

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •