post a pic.
Just purchased one of these second hand and new to the carPC thing.
Anyone know what the 2-pin plug is for behind the circuit board, and how i can use it?
Also, i didnt get a cig socket power adapter.
I'm thinking the only way i can power this safely in the car is to use an M4-ATX right?
thanks for the help.
This person seems to have something plugged in
Its the spot where the black and red cable are.
Is it me, or is something missing? Normally on the EBY701, pink and white wires are for the touch screen. This board looks different then the EBY701 ones I have. Is this the LED version?
Nirwana Project, the Android/Win 7 hybrid system!
1X Ainol Novo Flame Tab
3x Perixx Touchpads
3x 7 inch Screens
1X 7 inch motorized Screen
1x Win 7 PC
Thats not my board, my board is similar, i have the LED one , I'll post a pic of my board when i can
The old style CCFL, and the 1st gen. LED panels both used separate wires for the back lights, and as you guessed, they were identical looking. Pink and White.
The board in the picture is a 629.
If you have the connector on your board that looks like a narrow back light connector, and you say your panel is LED, then you have a 1st gen. LED version.
These pictures should clear things up.
The pic is of a 629 control board. THe black/red wires on the left side of the pic (above VGA) are not on the 701 control board so I can only assume you are refreing to the red/black wires at the top right of the pic. They are for the internal speaker.
I was wondering why the volume control is there!