"Transflective" LCD panel with res touch+controler for $101+$36 S+H

**Zogg** · 07-23-2011, 05:43 PM

Is anyone else interested in a completed assembly as seen in Post #179? If so, then please speak up so interest can be gauged by tft_lcd_org. Thanks!

**customGadz** · 07-23-2011, 08:15 PM

You can use a "poll", that will probably be the most effective way.

**Kevin22** · 07-24-2011, 07:58 AM

I've briefly scanned through this thread, but perhaps I missed it. Has anyone been able to successfully install this in a case? I'm looking for a cheap external monitor. I know someone thought they found a case, but actually it was a little different (designed for xenarc) and wasnt sure if those dimensions were going to work.

**RevheadKev** · 07-24-2011, 09:14 AM

Originally Posted by RevheadKev

I found the dimensions of the Samsung panel as 163.2W x 104H but could not find in this thread the size of the controller board.
I am interested to see if the board ends up taller than the screen which is how it looks in the pics, especially if you allow for how far the connecting plugs stick out.

Could anyone confirm the dimensions of the controller board ?

**LiquidKernel** · 07-24-2011, 03:19 PM

Originally Posted by 8838.com

those OSD shows will go away in few seconds after you switch. I will talk to our software engineer. but if we change the software, it will delay the available time again. So it may happen in future orders

If he could, that would be great. I know that they go away after a few seconds, but they still make the carpc look incomplete. By removing those from the screen, it will make this the go-to screen for carpc installers

**z8man** · 07-25-2011, 01:25 AM

yeah I agree with LiquidKernel, especially as the PC is booting and it switches resolutions several times. The fact it has to show the new resolution every time it changes does take away from the whole trying to make it as OEM looking as possible goal. It would be fantastic and the first of its kind (that I know of) to be able to turn that annoying "feature" off.

**floating.point** · 07-25-2011, 06:27 AM

I would very much like to purchase one of these with the enclosure-
The addition of a tripod mount threaded hole would be a huge selling point!!

**vampmasq** · 07-25-2011, 08:57 AM

Originally Posted by Zogg

Is anyone else interested in a completed assembly as seen in Post #179? If so, then please speak up so interest can be gauged by tft_lcd_org. Thanks!

I'm very interested. The screen is the last thing I need for my setup.

**KoGa** · 07-25-2011, 03:22 PM

Originally Posted by floating.point

I would very much like to purchase one of these with the enclosure-
The addition of a tripod mount threaded hole would be a huge selling point!!

Or hot shoe mount

**Auvee Bloomberg** · 07-25-2011, 04:20 PM

I should have waited to pull the trigger on this LCD since the new rev. just came out. Anyway, I ended up tearing a ribbon cable on my LCD and all I can say is Derrick has KILLER customer service. He met up with me locally, on the hottest day of the year. He later offered to give me a GREATLY reduced price on a replacement board even though the damage was 100% my fault. Very impressed... just wish I went with the new HDMI setup instead of having to run a clunky VGA through my car.. oh well!