Also, try both DVI and HDMI channels with your cell. Also, you need to play some video on your phone like youtube. Sometimes the cell phone won`t throw signal to HDMI until it plays video. just for your referenceOriginally Posted by 8838.com
Do you know what resolution your EVO 3D is?
Again, the RED connector is AV-1, WHITE is AV-2, Yellow is Audio. Needs to connect the camera with RED connector. When the trigger receive signal, it will auto switch to it
Any questions, please email to derrick.ny@gmail.com :)
oh... this gives me hope!
My cable actually is nothing like you described:
it has TWO YELLOW and one Red connectors.
One of the yellows is AV2 and I assumed the the other yellow should be AV1..
which cable did you connect? the red should be AV1, the white is AV2, the yellow is Audio. It is not like regular one
Last edited by maxthebuilder; 12-20-2011 at 08:04 PM.
I got the green board...
Let me try to clarify..
When I use HDMI port I can select either DVI or HDMI source, right?
At what point should I press > for 2 sec? When selecting sources?
What this does for DVI? What this does for HDMI?
Don't understand, sorry...
which board did you get? the green one or blue one? If the green one, you can press > for 2 sec for switch to 480i, this is design for 5D2 camera use.
Yes, when connect to HDMI port. the HDMI channel is tune for camera use. DVI channel is tune for computer use
OK. AV1 now works when connected to the red connector.
But it DOES NOT AUTO SWITCH! (from HDMI)
What can be wrong?
which cable did you connect? the red should be AV1, the white is AV2, the yellow is Audio. It is not like regular one
Nice work tft_lcd_org, I was wondering if you would be making that setup available for purchase?
Sorry for the confusing. New cables come with 2 yellow connectors, one for Audio and one for AV-2. Just got update
Any questions, please email to derrick.ny@gmail.com :)
These two channels are tune for different use
HDMI is for camera HDMI use and has the 2 sec ">" shortcut key.
DVI is tune for computer HDMI use.
Any questions, please email to derrick.ny@gmail.com :)
There is a port beside mini-usb port. It is a reverse camera trigger. You need to connect the reverse signal cable from your car to this port. then it will auto switch.
Any questions, please email to derrick.ny@gmail.com :)
This is a weird decision/design.. Yellow is supposed to be for video... Well, at least this is now clear.
Thanks!
Sorry for the confusing. New cables come with 2 yellow connectors, one for Audio and one for AV-2. Just got update
I was wondering what that port was for..
What type of connector does it use? Where "+' and where "-" go?
Do you guys have all this documented somewhere? Can you put together a short manual and post it?
Posting Permissions
12Likes
LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks