Page 90 of 173 FirstFirst ... 408081828384858687888990919293949596979899100140 ... LastLast
Results 891 to 900 of 1723
Like Tree13Likes

Thread: "Transflective" LCD panel with res touch+controler for $101+$36 S+H

  1. #891
    Constant Bitrate
    Join Date
    Sep 2005
    Location
    Australia
    Posts
    166
    Quote Originally Posted by 8838.com View Post
    My mistake. Our HDMI board has a DAC chip. It can out put 2 channel audio signal if your HDMI has audio source there
    OK, I just got one of these.. The 2 channel output was appealing. Now the problem I have is that you stated that this board (I have the green one) can output 2 Audio channels (i.e Left and Right Audio) but I cant seem to find the connection for 2 channels. The 2-pin connector on the board is for a speaker, so that's only one channel. The 3.5mm audio jack has connections for 2 A/V and one audio channel. So can you help me and tell me where the other Audio channel is. Is there another connector somewhere?

    All the documentation for this monitor should be at the start of this thread such as: A/V, audio and reverse camera trigger connections to save everyone reading through this insane thread.

  2. #892
    Maximum Bitrate
    Join Date
    May 2011
    Posts
    482
    Quote Originally Posted by Civic Modz View Post
    OK, I just got one of these.. The 2 channel output was appealing. Now the problem I have is that you stated that this board (I have the green one) can output 2 Audio channels (i.e Left and Right Audio) but I cant seem to find the connection for 2 channels. The 2-pin connector on the board is for a speaker, so that's only one channel. The 3.5mm audio jack has connections for 2 A/V and one audio channel. So can you help me and tell me where the other Audio channel is. Is there another connector somewhere?

    All the documentation for this monitor should be at the start of this thread such as: A/V, audio and reverse camera trigger connections to save everyone reading through this insane thread.
    the 2-pin connector is use to connect the little speaker in the whole case

    Check the pin-hole beside this 2-pin connector, that is another channel if you need stereo, but you need to do a little modify to connect.
    Any questions, please email to derrick.ny@gmail.com :)

  3. #893
    Maximum Bitrate
    Join Date
    May 2011
    Posts
    482
    Quote Originally Posted by Civic Modz View Post
    OK, I just got one of these.. The 2 channel output was appealing. Now the problem I have is that you stated that this board (I have the green one) can output 2 Audio channels (i.e Left and Right Audio) but I cant seem to find the connection for 2 channels. The 2-pin connector on the board is for a speaker, so that's only one channel. The 3.5mm audio jack has connections for 2 A/V and one audio channel. So can you help me and tell me where the other Audio channel is. Is there another connector somewhere?

    All the documentation for this monitor should be at the start of this thread such as: A/V, audio and reverse camera trigger connections to save everyone reading through this insane thread.
    the 2-pin connector is use to connect the little speaker in the whole case

    Check the pin-hole beside this 2-pin connector, that is another channel if you need stereo, but you need to do a little modify to connect.
    Any questions, please email to derrick.ny@gmail.com :)

  4. #894
    Low Bitrate
    Join Date
    Jan 2010
    Posts
    64
    Quote Originally Posted by windraver View Post
    Just bought the screen and an adapter as well. For those who were as lost as I was to where to find a car adapter or what kind:

    http://www.radioshack.com/product/in...ductId=3802146

    Radioshack sells them. Fits perfect with the screen, 12V and 2A. I'm planning to integrate this with the android touch module from custom gadz.

    Thanks to the people who suggested flipping the cable. I got it wrong the first time. Also, the pictures posted in the ebay post were very helpful for setting up the connections.

    My only question is, is there anyway I can get extensions for the ribbon cables? I am planning on integrating this with a flipout unit but the board wont' fit nicely.....
    I don't want to run with an inverter or a cigarette lighter adapter. Would this adapter be easy to cut up and wire directly into the car battery for power?

  5. #895
    Maximum Bitrate
    Join Date
    May 2011
    Posts
    482
    Quote Originally Posted by ninja6o4 View Post
    I don't want to run with an inverter or a cigarette lighter adapter. Would this adapter be easy to cut up and wire directly into the car battery for power?
    Yes, just find a DC power source from your car and you should be fine. If you use AC, then it won`t work
    Any questions, please email to derrick.ny@gmail.com :)

  6. #896
    Maximum Bitrate
    Join Date
    May 2011
    Posts
    482
    Just come out a new project: Complete 2DIN case Care PC barebone! Any though? Opinion welcome

    Name:  carpc-1.jpg
Views: 1055
Size:  108.1 KB

    Name:  carpc-2.jpg
Views: 854
Size:  30.0 KB
    Any questions, please email to derrick.ny@gmail.com :)

  7. #897
    Variable Bitrate
    Join Date
    Jan 2012
    Posts
    292
    Can we get it without the PC components? Just the screen and chassis???? If so when can I order one

  8. #898
    Maximum Bitrate
    Join Date
    May 2011
    Posts
    482
    Quote Originally Posted by Hdale85 View Post
    Can we get it without the PC components? Just the screen and chassis???? If so when can I order one
    WoW, you are fast

    This is still a project, just the first step now. But we should be able the sell the case with screen alone, with no PC components, when it become available.

    Now we need is everybody`s valuable opinions. Like the HDMI kit, this is another team work. Of course, the mp3car discount will always there
    Any questions, please email to derrick.ny@gmail.com :)

  9. #899
    Variable Bitrate
    Join Date
    Jan 2012
    Posts
    292
    I think it looks fantastic as is, Love the card reader on the front, the lip around the edge may be a little deep but it is tapered and what not so maybe not that big of a deal? I have to say I like it a lot more then the bybyte enclosure. How deep is it? And seriously how long before these would be available do you think?

  10. #900
    Maximum Bitrate
    Join Date
    May 2011
    Posts
    482
    Quote Originally Posted by Hdale85 View Post
    I think it looks fantastic as is, Love the card reader on the front, the lip around the edge may be a little deep but it is tapered and what not so maybe not that big of a deal? I have to say I like it a lot more then the bybyte enclosure. How deep is it? And seriously how long before these would be available do you think?
    Thanks for your suggestion

    Any idea about the best dims? like how deep it should be? since it is still under developing, everything is possible now. Should be available in 3 months, but just an estimate.
    Any questions, please email to derrick.ny@gmail.com :)

Similar Threads

  1. FS: 10.2" LCD Touch kit w/transflective enhancement
    By Motorcity in forum Classified Archive
    Replies: 15
    Last Post: 03-14-2007, 02:20 PM
  2. Replacement 4:3 8" Touch Panel For "Super"
    By gsd_racing in forum Input Devices
    Replies: 4
    Last Post: 01-25-2006, 05:28 PM
  3. Replies: 146
    Last Post: 08-19-2004, 03:39 AM
  4. Replies: 2
    Last Post: 12-11-2003, 10:36 PM
  5. Can I use an 8" touch panel with a 6" lcd?
    By Odie in forum LCD/Display
    Replies: 6
    Last Post: 10-29-2002, 11:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •