4.3" vga monitor sdk
Just fond these on ebay, and wondering if anyone has tried them?
Im looking at fitting one in the dash of my mr2 and mondeo along with some digital gauges like these so it displays gps info or info from dash commander
so the mr2 should look something like this, this is with dakota digital gauges
also a touch panel could be fitted with a usb controller board
Any feedback on these screens would be great, no one seams to make a usb monitor in 4.3" that i can find
Please re-post your links. None work properly.
Hey guys and gals
dont know why the links arnt working but here goes
Try these or search for these on the bay
4.3" LCD AT043TN24V.1 + VGA+2AV driver board
4.3" inch LCD for AT043TN24 + VGA + 2AV Driver Board Set * Car Vehicle View NIB
4.3" Garmin Nuvi 600 610 650 660 670 680 LCD Touch Screen Digitizer panel
AT043TN24V.1 has decent brightness and CR, but 480x272 resolution is not very high for computer use. I know the controller from Vitrolight will scale to the LCD, but....
thanks, going to order one to try, im currently using a 4.3" lcd connected to the rca on the graphics card, doesn't look to bad but in sure vga will be better, also the screen in my cheapo lcd is the same as in my cheap china gps swapped them over and work fine in each unit, the resolution on the gps is much better than through the rca, also got the touch screen to work on it by using the controller board from a 7" touch panel :)
the screens http://www.ebay.co.uk/itm/4-3-TFT-LC...item2c62743380
and the gps http://www.ebay.co.uk/itm/4-3-Touch-...#ht_4456wt_905
does anyone know where i can but just the controller board?