Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 37

Thread: Where are the HD touchscreens?

  1. #11
    Variable Bitrate
    Join Date
    Jan 2012
    Posts
    305
    I don't know, the Revosys one with sunlight readable, anti reflective, anti finger print, 1200nit HDMI input and projected capacitive touch doesn't seem TOO terrible of a deal compared to other Capacative sunlight readable LCD's.

  2. #12
    Newbie
    Join Date
    Feb 2013
    Posts
    1

    Any other leads???

    So is this the extent of HD touch panels, what has been suggested thus far? I've been looking for HD capable screens in a 7 & 12 inch widescreen format, in a panel/flush mount installation. My application is not vehicular, and the higher quality will make a difference.

    The Revosys product looks like it could work for me, but the price is quite dear. I imagine that is the result of no competition, from what I've (not) found.

    I should also say hello, I just came across the forum. Thanks for letting me jump in!

  3. #13
    Variable Bitrate
    Join Date
    Jan 2012
    Posts
    305
    I think I may try out the one on ebay that's 1280x800, someone said the controller board it comes with won't actually accept that resolution but I've been talking with the seller and he says it does? So I think I may give it a shot and see, worse comes to worse I'll use the emails as proof of his claims and get a refund.

  4. #14
    Maximum Bitrate tft_lcd_org's Avatar
    Join Date
    May 2010
    Location
    Detroit, MI
    Posts
    483
    Quote Originally Posted by Hdale85 View Post
    I think I may try out the one on ebay that's 1280x800, someone said the controller board it comes with won't actually accept that resolution but I've been talking with the seller and he says it does? So I think I may give it a shot and see, worse comes to worse I'll use the emails as proof of his claims and get a refund.
    Good luck with that. Did I mention I have a few of those controllers in my shop?

  5. #15
    Variable Bitrate
    Join Date
    Jan 2012
    Posts
    305
    Probably, and if it's the case then you can say I told you so. I know you want me to buy something from you, you just don't have quite what I'm looking for. If you can get something that's in the higher pixel density then by all means I'd gladly buy it from you.

  6. #16
    Maximum Bitrate tft_lcd_org's Avatar
    Join Date
    May 2010
    Location
    Detroit, MI
    Posts
    483
    Quote Originally Posted by Hdale85 View Post
    Probably, and if it's the case then you can say I told you so. I know you want me to buy something from you, you just don't have quite what I'm looking for. If you can get something that's in the higher pixel density then by all means I'd gladly buy it from you.
    That's not what I meant. I just wanted to let you know that I have been using those very same controllers, and they are limited.

    The seller you mentioned is where I get them from, and I program them here for what ever panel I am using. The controller uses the same RTD 2662 chip that the Lilliputs use.
    If you look at the datasheets for that chip, you will see that up to 1440 x 900 Input is accepted.
    However, without the proper firmware flashed to it, then it is only as good as the paper it's printed on.

    As for purchasing from me, sure that would be nice but I would rather lose a sale and have an Informed Customer walk away than sell you something you don't want/can't use.

  7. #17
    Variable Bitrate
    Join Date
    Jan 2012
    Posts
    305
    I understand, and I wasn't trying to be an ***. Honestly I'd love for you to have a 1280x800 display. If the chip can support 1440x900 input then wouldn't it be able to accept a 1280x800 input? Which is what the seller claims.

  8. #18
    Maximum Bitrate tft_lcd_org's Avatar
    Join Date
    May 2010
    Location
    Detroit, MI
    Posts
    483
    Quote Originally Posted by Hdale85 View Post
    I understand, and I wasn't trying to be an ***. Honestly I'd love for you to have a 1280x800 display. If the chip can support 1440x900 input then wouldn't it be able to accept a 1280x800 input? Which is what the seller claims.
    It will. Problem is, the files he has are not written that way. At least none of the files he sent to me.

    I do hope that he does have the proper files. For the price it would be a good deal. Add the capacitive touch screen and the price is still good.

  9. #19
    Variable Bitrate
    Join Date
    Jan 2012
    Posts
    305
    Who knows maybe he updated the firmware? I agree the price is very nice which is why I'm ok with taking a stab at it. If it doesn't work as they claim I'll have to go through the process of trying to get a refund, or at the worst I'll be out 100 bucks which will suck but not the end of the world. If it does work then that's awesome and maybe you can start carrying them and I'll definitely buy one of those 6.95" touch overlays from you

  10. #20
    Variable Bitrate
    Join Date
    Jan 2012
    Posts
    305
    Well I should have the LCD sometime this week and I'll let you guys know for sure. tft_lcd_org maybe if it has different files than what you have he will send them to you, or maybe we can get them off this one or something. I'll also be interested in knowing when you get those 6.95" touch panels.

Page 2 of 4 FirstFirst 1234 LastLast

Similar Threads

  1. touchscreens
    By hoodlum in forum Input Devices
    Replies: 0
    Last Post: 09-18-2006, 04:47 PM
  2. two touchscreens pls help
    By boombee in forum Car Audio
    Replies: 5
    Last Post: 04-04-2006, 09:26 AM
  3. FS: Touchscreens
    By infrared in forum Classified Archive
    Replies: 88
    Last Post: 03-01-2005, 01:53 PM
  4. Elo Touchscreens?
    By Misanthro in forum Input Devices
    Replies: 7
    Last Post: 10-16-2004, 06:54 PM
  5. What touchscreens are out there?
    By RDaneel in forum LCD/Display
    Replies: 0
    Last Post: 12-03-2003, 03:32 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •