Xenarc Touch Panel on Lilliput Controller
Has anyone ever use a Xenarc touch panel with the Lilliput touch screen controller? Basically swapping out the touch panel on the Lilliput VGA screen. For some strange reason I couldn't get mine to work. I had to replace my Lilliput touch panel so I figure I try the Xenarce one. It is basically the same type of 4 wire resistive touch panel except the 4 wires are not line up with Lilliput plug. After some re-arranging I got the wires to line up but I can't calibrate it. Once the computer is booted, the mouse cursor or touch area is on bottom left of the screen. Everything is off by about half a screen to the left and down. Also, it looks like something is dragging the cursor to the bottom left of the screen because I canít even move the mouse. The mouse will move but as soon as I let go it will be pull back to the bottom left. Basically it looks like something is pulling it to the bottom left and is not letting go. I can't calibrate it with the software using the 4 or 25 points calibration. I am using the latest Lilliput driver (worcol touch pad) I think that's the name. Does anyone have any suggestions.