Lilliput USB

**PaCMaYNE** · 10-12-2004, 08:17 PM

I was just curious to know if anyone knew the correlation of the Lilli USB wire colors with that of traditional US USB wire colors

Lilli= Red, Brown, Yellow, Darkyellow

US- Red, Black, White, Green

reds obvious and im guessing brown is neg and the 2 yellows are data

anyone?

**PaCMaYNE** · 10-12-2004, 08:26 PM

NM figured it out,, for anyone who may ever want to know

Traditional - Lilli

Red ~ Red

White ~ Dark Yellow

Green ~ Yellow

Black ~ Brown

**Curiosity** · 10-12-2004, 09:29 PM

The other end of it (the TS controller inside) is stupid.

Black = 5V
Red = GND
White/Yellow are normal.

**PaCMaYNE** · 10-13-2004, 06:14 PM

Originally Posted by Curiosity

The other end of it (the TS controller inside) is stupid.

Black = 5V
Red = GND
White/Yellow are normal.

Thanks,, another reason i wanted to know is Armen told me some of the wires in some new Lillis for the controller were mixed up so i tried reversing the 2 yellows as that seemed to be the most plausible thing to happen

**Curiosity** · 10-13-2004, 06:20 PM

Those will probably just keep it from working until you get it right, but reversing the other 2 will release the magic black smoke.

**PaCMaYNE** · 10-13-2004, 06:30 PM

indeed..

**thefreeauction** · 12-29-2005, 07:57 AM

Originally Posted by PaCMaYNE

NM figured it out,, for anyone who may ever want to know

Traditional - Lilli

Red ~ Red

White ~ Dark Yellow

Green ~ Yellow

Black ~ Brown

I know I'm bringing up an old thread, but I hardwired my lilliput to a USB cable using the above connections and now the touchscreen doesn't work. Has anyone else wired it up this way? Is there a better way to add a long USB cable to the end of the Lilliput?

The only other thing I can think of that I messed up my wires/connections when installing the monitor in the dash, since it worked before the install with the regular USB cable.

Dan