Lilliput 7" @ 800x480
I'm using powerstrip to run my Lilliput at 800x480 (native resolution). Everything is fine except the image displays on the top portion of the screen. Across the bottom 1/4 or so its just all black. If i go back to 800x600 it fills the rest of the screen. I'm guessing its something simple i'm missing :)
Is there an auto-adjust or similar feature you could try?
Yeah, i tried the auto adjust as well as turning the lcd off and back on. Unplugging power etc. I haven't tried doing a software reset (via controls) yet, however will try that in the morning. Doubt that will work though.
any other suggestions?
Are you able to get a 800X480 resolution so that even the Lilliput screen think it's running that resolution ? If so, would you mind posting your settings ?
Now, your problem, I made a software reset on mine before I did the adjustments in Powerstrip and it fills up the whole screen, looks allright too
although the Lilliput thinks it's running 640X480. (or maybe it was 640X400, I'm re-installing XP right now so I'll have to check later)
hmmm, i'll try that right now. The software reset did nothing...and i just noticed there is a black strip along the top too. it thinks its running 800x600 right now. I'll go try and repost
640x480 fills the screen...but i cannot get 800x480 to. It just puts the display to the top of the screen. What should my refresh settings be? And would that make a difference?
This is what I'm using...
PowerStrip timing parameters:
Generic timing details for 800x480:
HFP=68 HSW=80 HBP=52 kHz=34 VFP=47 VSW=3 VBP=33 Hz=61
Linux modeline parameters:
"800x480" 34.063 800 868 948 1000 480 527 530 563 -hsync -vsync