TView Auto Power On

**MoonShiner** · 01-27-2005, 08:19 PM

Has anyone been able to get the TVIew monitor to auto power on? I seached the threads, but the auto power on is geared towards the lillis and xenarcs.

Any help is appreciated.

Thanks in advance!

**WebDog** · 01-27-2005, 08:35 PM

i would like to know also.

**MatrixPC** · 01-28-2005, 11:27 AM

You can always do the relay-resistor-capacitor method aka constant-to-pulse output.
Look at the sticky thread the Hardware dev forum for how to wire a constant to pulse relay.

**WebDog** · 02-05-2005, 04:14 PM

Hmm im not finding what you are talking about, noting came up in the search.

**Cris** · 02-05-2005, 04:25 PM

I too am interested in this...I'm also interested on a way to make the screen switch on/off on aux video signal: for the back up cam.

**MatrixPC** · 02-07-2005, 09:42 AM

Okay,
This one from the12volt dot com.

Switch = of course your car ACC/IGN 12V switch signal.
fulse 12+ (78) and momentary 12+ out (30) should be connect to 2 pins of the power button.

**WebDog** · 02-07-2005, 12:38 PM

what relay is that? and is that some kind of circit on the relay ?

**MatrixPC** · 02-07-2005, 12:56 PM

Standard Bosche (sp) type automobile relay.
You CAN'T put this relay inside any LCD monitor.
To do this mod, you have to run 2 wires from the power button to outside the case where you put the relay.
Yes, that a circuit that will "Push" the power button for you.