Auto Power On 619 Lilliput - Programing Guide

**snmnetwork** · 08-01-2005, 12:23 PM

I have the same old one pictured above and the factory settings came up. Everythangs workin Mang!

**Danger69** · 08-06-2005, 04:23 PM

I have a 619GL-70NP/C/T and from what I see I only have 6 spaces to input the code but everyone here is inputing more than that. I did enter 1270110 and I'm assuming the "0" at the end is to save my settings. Now when I turn off my computer is the power led suppose to be green or red? Because it stays green. If I finish entering the code and go to factory menu the power led becomes red and green together. I tried powering off again with that led on and it does the same. Is the autopower suppose to be instant once I power down the computer? Oh and for those of you who don't get it working try to turn on your lcd and unplug the power and replug it and reenter the code. It works for me to enter the code. But thats it.

**soundoff** · 08-16-2005, 10:04 AM

Just entered the codes on my lillliput. worked exactly as descrbed in the instructions.

629GL-70NP/C/T bought this week

**White Night** · 08-16-2005, 11:33 AM

Originally Posted by mega

Sure no problem.

I booted up my desktop and switched on my lilliput
Waited for windows to load up
Pressed in the following code using the remote 588998 (waited about 1 second between each keypress)
As you can see in my above posted picture - the factory setting screen comes up
Then I entered the following code 0970110
Pressed 5 on the remote to save the settings (you can press any button to save, i think)

Hope that helps!

I have an older Lilliput with the grey bezel and the above instructions worked perfectly !! And sorry, I don't have the exact model #. If I wasn't going to take my system apart to do the solder mod, I'm not going to take it apart to get the model # ;-)

**vairu** · 10-10-2005, 01:11 PM

This information is awesome, can't wait till my lili comes in in 3 days!

**Poe** · 10-17-2005, 04:29 PM

the code worked for me... but now when it powers up... it goes directly to VIDEO1 and not VGA mode. how do i change it so it starts up in VGA mode?

**looneeii** · 10-22-2005, 01:49 AM

Funny, I did the auto-programming mod on my 8" and it works to have auto-on for the VGA input but now the remote doesn't work and all blue lights for the buttons stay on. Anyone else have this issue?

**looneeii** · 11-11-2005, 09:28 AM

bump

**DK888** · 11-11-2005, 09:33 AM

Nope, I was thinking of switching to an 8in. lemme know if you resolve this.

**jtrnp** · 11-19-2005, 03:30 PM

Ok, I was trying to key in the auto-on code, and i accidentally got a number off, now my lilliput no longer has vga mode. My only choices are video 1, video 2, and tv mode. WTF is tv mode? When I hit menu in tv mode, I get the option to program channels and such. I really need my vga mode back!