lilliput in-dash 7"

**blackflux** · 08-09-2005, 03:53 PM

Hello

Sorry, we don't have any refund policy. Please ship back for replacement. If you like, please choose other items. Refund of price difference may be offered or additional payment is required for upgrading to other items.

1) Please send the product back to us by airmail (I suggest you to use the cheapest way to do) and we will examine it and arrange a replacement. (Please send the unit with original packing, we do not need any cable and wiring for replacement) We will send the unit back to the manufacturer.

(The manufacturer is located in Mainland China, we have to send the item and wait for them to return the replacement therefore the process may take a few days)

2) Send the damaged/faulty product (mark as warranty repair) to the following
address:

To: Stephen Sin
Blk.A, Rm.804,
Goldfield Industrial Centre,
No.1 Sui Wo Road ,Fo Tan,
New Territories,
HONG KONG.

Man this is some bull*****....

**regal** · 08-09-2005, 05:08 PM

Originally Posted by blackflux

Man this is some bull*****....

Sure, is mate, been there done that.

I’ve mailed them at least 15 times and tried every trick in the book but the replies just say the same thing

It’s your fault you thought you could by a Lilliput product from ex-audio and expect it to work not ours; we have people queuing up to make the same mistake.

Please send it back so you can waste more money on shipping costs, and then we can start all over again.
Oh! and buy the way just in case you think you have rights we don’t give refunds.

Singed
Who gives a ****?

**BikeBoy24** · 08-09-2005, 05:29 PM

Well, I got the new cable today. What I feared, is true. The unit is defective. Now I have to wait for instructions on what to do with it. 2 months, no working screen still...

**regal** · 08-09-2005, 06:27 PM

Originally Posted by BikeBoy24

Well, I got the new cable today. What I feared, is true. The unit is defective. Now I have to wait for instructions on what to do with it. 2 months, no working screen still...

Sorry to hear that M8 I really am.

I for one was hoping for some good reports to start appearing on the forum.

I’m now beginning to think we are all paying beta testers for Lilliput.

I just don’t know what to say to you mate because I’ve said on thing on the forum and then done the opposite my self thinking all would be OK in the end.

When and if I get a replacement and it turns out to be faulty I,am going to take it up with watch dog or somebody like that and see if they will strip it down and give there verdict.
Am I dreaming to even think they might be interested nobody eals seems to be.

**blackflux** · 08-09-2005, 06:28 PM

Do anybody know exactly what lilliput screen is in this HU? I am temped to take it apart and fab a bezel for it.

**regal** · 08-09-2005, 07:12 PM

Originally Posted by blackflux

Do anybody know exactly what lilliput screen is in this HU? I am temped to take it apart and fab a bezel for it.

Yep, Notaworkie

**pagey** · 08-09-2005, 10:14 PM

Well so far so good (touch wood)

I have had the screen running on the bench for a week now without any issues.

VGA input worked straight up.
No motor issues
Radio button didn't kill it
Touch screen works
TV fine

It will probably stop now I've written this.

Anyway probably install it in 2 weeks as time permits. i'll post updates as it goes.

cheers
Pagey

**01blackbirdws6** · 08-10-2005, 12:41 AM

Originally Posted by BikeBoy24

Well, I got the new cable today. What I feared, is true. The unit is defective. Now I have to wait for instructions on what to do with it. 2 months, no working screen still...

Now I am scared that mine is not going to work either as i had the same problem as you Bikeboy24. I also ordered some cables. I will try programming mine like bran55 did. Hopefully that will work, but i doubt it.

**01blackbirdws6** · 08-10-2005, 01:11 AM

Originally Posted by bran55

hey ya sure no prob this is what they told me to do to fix the VGA prob

1) First turn the monitor .
2) Use your remote and press 588998 .
3) The screen will come out the enter code column .
4) Please use your remote and enter 0330001.
5) wait for 2 sec and press any number to save the code .
6) turn off the monitor and turn it back on .
7) it should have the VGA mode now .

i dunno if that can help any1 but good luck!

Hey bran55, what mode (input) were you in when you tried this code. Everytime I tried the 588998 I could never get the screen to come out. Any suggestions?

**regal** · 08-10-2005, 04:32 AM

[QUOTE=pagey]Well so far so good (touch wood)

I have had the screen running on the bench for a week now without any issues.

Hey, that’s good news, and it’s a bout time we had some.

So have you had it connected up to some speakers then?