Page 6 of 83 FirstFirst 1234567891011121314151656 ... LastLast
Results 76 to 90 of 1244

Thread: lilliput in-dash 7"

  1. #76
    Newbie
    Join Date
    Jul 2005
    Posts
    31
    dont worry you guys, you wont be dissappointed

  2. #77
    Constant Bitrate soundoff's Avatar
    Join Date
    Jul 2004
    Location
    AUSTRALIA
    Posts
    192
    how sturdy is the screen? Once its in its upright position, if you push on the top are of the screen does it flex at all?

    Touchscreens are hard enough to use in the car as it si without them moving around when you touch them.

  3. #78
    Newbie
    Join Date
    Jul 2005
    Posts
    31
    yes the screen is sturdy when its unfolded all the way to back, but if you move it in a different position it isnt quite as sturdy

  4. #79
    Constant Bitrate soundoff's Avatar
    Join Date
    Jul 2004
    Location
    AUSTRALIA
    Posts
    192
    how far back is all the way back? what sort of angle are we talking

  5. #80
    Newbie
    Join Date
    Jul 2005
    Posts
    2

    Lilliput GL701-NP

    I just got my lilliput 7" indash screen from ex-audio on ebay and i installed it in my car and everything. I have to say that I am having problems with the touch screen. I was able to (after many reboots and different driver versions) get the touchscreen to work. However, it is very buggy in that sometimes it will just stop working and be unresponsive. Occasionally it will start working again but not for long. Is anyone else having the same problem???? what can i do?????

  6. #81
    Constant Bitrate
    Join Date
    May 2005
    Location
    Toronto, ON
    Posts
    179
    I got mine earlier this week. I noticed that the harness has 2 ground wires? Why is this? Also, the instructions don't really describe the wiring that well. Can someone breakdown the different colours? I'm assuming they follow the standard, but I just want to make sure. Thanks.

  7. #82
    Constant Bitrate
    Join Date
    May 2005
    Location
    Toronto, ON
    Posts
    179
    Also, I haven't hooked it up yet. Does anyone know if there is an auto fold down feature when the ignition is turned off? My current car deck does something like that.

    I know with the other lilliput screens, you can program them to turn off automatically.

  8. #83
    Variable Bitrate
    Join Date
    Jul 2005
    Location
    U.K.
    Posts
    362
    Any one in the UK received one yet? I would like to know what the import charges cost.

  9. #84
    Raw Wave kickercivic1's Avatar
    Join Date
    May 2003
    Location
    Florida
    Posts
    2,031
    u just got email from that ebay seller. And mine should be in from 1-2 weeks. I didn't order it direct because i was affraid to d bank transfer.

  10. #85
    Newbie
    Join Date
    Jul 2005
    Posts
    31
    yes the screen does fold down after like 30seconds of turning the ignition off. Im not sure why they have two grounds. About what each wire is for did ur wires come labeled (ie front right = FR and rear left = RL) cause mine came with little stickers on them labeling them

  11. #86
    Constant Bitrate
    Join Date
    May 2005
    Location
    Toronto, ON
    Posts
    179
    Quote Originally Posted by bran55
    yes the screen does fold down after like 30seconds of turning the ignition off. Im not sure why they have two grounds. About what each wire is for did ur wires come labeled (ie front right = FR and rear left = RL) cause mine came with little stickers on them labeling them
    When you say it folds down after 30 seconds, is that with the screen connected to the unregulated 12V from the car?

    Yup, my wires came labeled too. Except for the orange one, that was not labeled. Normally, this is the dimmer wire.

    Not sure what the blue wire is for either. Normally, this is for the powered/ampped antenna. It is labeled "POUR"

    And which wire is for the remote turn on for my amps?

  12. #87
    Constant Bitrate
    Join Date
    May 2005
    Location
    Toronto, ON
    Posts
    179
    Did you also ground both the black wires? I'm thinking one is for the screen and the other is for the touch panel or radio. I wish I had the wiring diagram. I'm not sure whether I should ground the screen to my power supply or to the chasis.

  13. #88
    Newbie
    Join Date
    Jul 2005
    Posts
    31
    Quote Originally Posted by BikeBoy24
    When you say it folds down after 30 seconds, is that with the screen connected to the unregulated 12V from the car?

    Yup, my wires came labeled too. Except for the orange one, that was not labeled. Normally, this is the dimmer wire.

    Not sure what the blue wire is for either. Normally, this is for the powered/ampped antenna. It is labeled "POUR"

    And which wire is for the remote turn on for my amps?


    Question 1 - it folds down when connected to the ignition wire and the permenant power source

    Question 2 - mine was labeled "NE" which in the intructions means not used

    Question 3 - yes the "POUR" is for a power antenna

    Question 4 - Im jus taping into the ignition wire for my remote wire for the amps

  14. #89
    Newbie
    Join Date
    Jul 2005
    Posts
    31
    Quote Originally Posted by BikeBoy24
    Did you also ground both the black wires? I'm thinking one is for the screen and the other is for the touch panel or radio. I wish I had the wiring diagram. I'm not sure whether I should ground the screen to my power supply or to the chasis.
    yes i grounded both to my stock ground cable, but im not quite sure why there are two i jus say ground them ther there for a reason

  15. #90
    Constant Bitrate
    Join Date
    May 2005
    Location
    Toronto, ON
    Posts
    179
    Thanks for the quick replies.

    I'm curious, why is the fuse on the switched power yellow VCC? Shouldn't it be on the constant power red batt?

    Just to make sure, I connect my power supply wire to the red wire (BATT)? But that wouldn't be too good...the monitor would lose its settings everytime the computer shuts off wouldn't it?

Similar Threads

  1. 3rd Time's the Charm??? Mercury Cougar Dash Lilliput
    By antimatter in forum Fabrication
    Replies: 23
    Last Post: 08-07-2006, 01:21 PM
  2. FS: 7" In Dash Lilliput (Both Parts)
    By Avalerion in forum Classified Archive
    Replies: 4
    Last Post: 06-28-2006, 05:02 PM
  3. FS : Car pc (mini-itx full + lilliput in dash 7")
    By mph125 in forum Classified Archive
    Replies: 2
    Last Post: 03-18-2005, 08:48 AM
  4. Replies: 5
    Last Post: 04-01-2004, 05:37 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •