Results 1 to 6 of 6

Thread: Xenarc, display shifts to right at 60 hz

  1. #1
    FLAC
    Join Date
    Sep 2004
    Location
    Falls Church, VA
    Posts
    904

    Xenarc, display shifts to right at 60 hz

    Ok, what in the hell am i doing? I'm running the Xenarc off of a Nvidia mx440 card at 600 x 800 resolution. If i run it at 60 hz, the screen shifts to the right cutting off half of the screen. If i run it at 75 hz, it come back to center but doesnt look very good.

    From my searching I have discovered that the native res is not 600 x 800? So i want to use something else? Can anyone lead me in the right drection?

  2. #2
    Maximum Bitrate
    Join Date
    Aug 1999
    Location
    Birmingham, Alabama (War Eagle!)
    Posts
    700
    Will, Unfortunately I've had this same problem with my Gain lcd (Gain is a clone of Xenarc). I pretty much have resorted to running it at 1024x768 which if you can imagine sucks for a 7" lcd. If you find any other solution please let us know.

  3. #3
    FLAC PatO's Avatar
    Join Date
    Dec 2000
    Location
    Afton MN
    Posts
    1,120
    Have you tried the recalibrate thing in the menus? How about using custom timings in your GEForce drivers?

    http://www.jeepmp3.com/
    CarPC Stolen. Starting over.
    Ne1 recognize the avatar?

  4. #4
    FLAC
    Join Date
    Sep 2004
    Location
    Falls Church, VA
    Posts
    904
    just upgraded to the new drivers which openned up several possibilities. I tried to make a custom setting of 800 x 480 but the xenarc defaults to 640x480. i need to find someone else who did the same with a geforce and xenarc who can offer up some advice on settings.

  5. #5
    Admin. Linux loser.
    Auto Apps:loading...
    Bugbyte's Avatar
    Join Date
    Sep 2004
    Location
    Corning, NY
    Posts
    7,364
    Blog Entries
    2
    Will, did you ever get this figured out? I've had my Epia M10000 out of the car for awhile and just put it back in to find that it shifted everything to the right and cuts off half of the screen.

    Actually, it displays everything properly for about 1 second, then jumps to the side and cuts off half the display

    In 640X480 it works fine.

    In the S3 settings under the Monitors tab, it doesn't let me set they type of monitor. I'm wondering if my video drivers need reloading?
    Quote Originally Posted by ghettocruzer View Post
    I was gung ho on building a PC [until] just recently. However, between my new phone having internet and GPS and all...and this kit...Im starting to have trouble justfiying it haha.
    Want to:
    -Find out about the new iBug iPad install?
    -Find out about carPC's in just 5 minutes? View the Car PC 101 video

  6. #6
    My Village Called 0l33l's Avatar
    Join Date
    Jul 2004
    Location
    Berkeley, CA
    Posts
    10,520
    Quote Originally Posted by defsquad
    Will, Unfortunately I've had this same problem with my Gain lcd (Gain is a clone of Xenarc). I pretty much have resorted to running it at 1024x768 which if you can imagine sucks for a 7" lcd. If you find any other solution please let us know.
    Actually, the Xenarc is a Gain, but with a warranty.

Similar Threads

  1. Xenarc issues
    By Whaleboy in forum LCD/Display
    Replies: 23
    Last Post: 01-07-2003, 11:23 PM
  2. Xenarc Display dead pixels??
    By Mitokondria in forum LCD/Display
    Replies: 4
    Last Post: 08-28-2002, 09:41 AM
  3. Xenarc Meta FAQ
    By Skippman in forum LCD/Display
    Replies: 0
    Last Post: 08-23-2002, 04:11 PM
  4. In Dash Kit for 7" WS display Xenarc
    By gunnt in forum LCD/Display
    Replies: 0
    Last Post: 08-22-2002, 03:53 PM
  5. Replies: 9
    Last Post: 08-12-2002, 12:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •