reversed polarity == Kentucky Fried Lilliput?
please say it isn't so...
I hook my Lilliput up directly to my car computer's PSU, via one of the internal molex connectors. well, when I wnet to hook my car PC back up to my Lilliput the other day, the two power wires to the Lilliput had fallen out of the Molex connector. So, not even questioning it, I put the two power wires back into the molex connector, because I thought I knew which wire was which. Well, apparently I got them reversed, and I powered off once I quickly realized my mistake. After swapping the power wires back to the correct arrangement, well, now my Lilliput power light still turns on, and pushing the power button on the lilliput will turn the power light from red to green. However, All I see on the display are some whitish-grayish horizontal "bands" wavering across the top half of the display. That's all I get on the display.
So, am I screwed, did I completely trash my $250 display? or is there hope, is there any fuses or sacrificial diodes or anything like that inside my lilliput that might have limited the damage?
Please help... :( :( :(