LinkBack URL
About LinkBacks
Reply With Quoteconsidering the operating voltage is 10.5 to 14v, You could wire it directly to your car's 12v source like a headunit.
hello, I just wired my k301 into my dash. one of the features that i like is that it remembers its last position and screen memory but, like many here, i decided to power it thru my dsatx for the fear of prematurely killing it. i realized that by me powering it this way, i am not providing power to it when the pc is off and, hence, not auto-opening on ignition. So, my question is this. Is there any way of me providing a regulated +12v to the k301 without purchasing additional hardware, eg. http://www.mp3car.com/store/product_...roducts_id=138 I would still like to use the psu, thanks
the K301 is made for a car and nothing else so the voltage is fine it isnt the same as say a lilliput which is meant to be used on 12v for a mains adapter.
would spliceing of the headunit power wire adversely affect anything?
Hardware: [-------- ]30%
Software: [----- ]20%
Install:[------- ]70%
2005 Subaru WRX - New 1.83 GHz Mac Mini - OSX/parallels is my front end - K301 InDash monitor
i wired it with the HU power directly.. the thing works reeaaly nice..Originally Posted by OUSilver05
directly to the car's power.. no flickering ..nothing. it does not take so many amps so it is OK
Posting Permissions
Bookmarks