LinkBack URL
About LinkBacks
Reply With QuoteConnect "cable 2" with the RED wire with a fuse that said DC 12V to the YELLOW wire on the molex. "cable 2" BLACK to the Black on the molex.
Okay, can anyone give me pointers of where this could go wrong?
Step 1, From the TFT cable 1 to TFT cable 2.
The conector on the left comes from the TFT, the one on the right plugs into the one on the left and leaves you with an 12V with fuse, and a GND
Step 2, cable to molex.
This is where I'm confused. I've read that I need the yellow 12V and the black GND, but there is two of each? How do I get the red and black from the TFT connected to the (1 or 2?) wires of the molex?
If anyone has any suggestions or needs more information. Please say!
Many thanks.
Gary
Connect "cable 2" with the RED wire with a fuse that said DC 12V to the YELLOW wire on the molex. "cable 2" BLACK to the Black on the molex.
2004 Matrix XR A7N8X-VM/400 AMD XP-M 2500+, DS-ATX
89 Supra Turbo P3 600E@750/Abit BE6 II, Alpine M-BUS Car2PC.
Y2K Accord Dell GX150
RoadRunner is the best FE PERIOD
EmoRebellion is a SCAMMER
WHERE THE HELL DID ALL THE NOOBS COME FROM.
Dude, if you have issues connecting two wires to each other, though I am impressed you figured out that the yellow is 12 volt, and black is ground, YOU SHOULD NOT BE INSTALLING A CARPUTER. Plain and simple.
Yet another question that is akin to "How do I use a keyboard?"
Get the other side of that plastic little thing, and viola, YOU ARE DONE.
Damn, how much easier can it be???
From now on, post in the NEWBIE forum please.
Michael
Originally Posted by Bravo_Gaz
Okay, can anyone give me pointers of where this could go wrong?
Step 1, From the TFT cable 1 to TFT cable 2.
The conector on the left comes from the TFT, the one on the right plugs into the one on the left and leaves you with an 12V with fuse, and a GND
Step 2, cable to molex.
This is where I'm confused. I've read that I need the yellow 12V and the black GND, but there is two of each? How do I get the red and black from the TFT connected to the (1 or 2?) wires of the molex?
If anyone has any suggestions or needs more information. Please say!
Many thanks.
Gary
...I love the French language...especially to curse with...Nom de Dieu de putain de bordel de merde de saloperies de connards d'enculés de ta mère. You see, it's like wiping your *** with silk, I love it.
Love you too. The bit I didn't know about was why there was two wires leading to the molex, as on all my other systems, there has only been one.
And yes, I am a newbie, I was just looking for confirmation this wouldn't blow my screen. The rest - I have sorted. But you are so far up your own arse to understand this, so I'll shut up.
Thanks
In case you didn't know or didn't find out why. Here is a tip for you.
Trace the wires from that molex to see where does it end. These are the posibility you will find.
- To the PSU.
- To another molex that also has 2 wires like that one.
- To a floppy connector.
- To another molex that only has 1 wires like your other system.
Now you know what 2 wires mean?
2004 Matrix XR A7N8X-VM/400 AMD XP-M 2500+, DS-ATX
89 Supra Turbo P3 600E@750/Abit BE6 II, Alpine M-BUS Car2PC.
Y2K Accord Dell GX150
RoadRunner is the best FE PERIOD
EmoRebellion is a SCAMMER
Posting Permissions
Bookmarks