800x600 stopped working! Help Please! Ex-Audio TS LCD

**optimatez** · 11-04-2007, 12:17 AM

i have a 7" lilliput also, and my 800x600 just hit the dirt also

i think ill run the 640 resolution and just scale down road runner, that way everything is still easy to read in windows.
I read in another thread that someone had a bent pin going into their lilliput which caused this problem, that might be another point to check.

i hope this problem is solved soon, what a pain in the ***. :-/

=OpTi

**aleshu** · 12-01-2007, 07:32 AM

Sorry to bring back an old thread, but I have just received a reply from Lilliput on how to solve this problem. Here it goes:

Hi again sirs,

Thanks for your reply. We just saw your e-mail yesterday. We had transfered your problems to our technician to see. They advise that you can change parts
is 8-pin memorizer (24c16) to solve your problem.

We are looking forwards to your reply ASAP.
Best Regards!
Have a good day!

This part is an EEPROM and is easy to find. I got one for about $0.50 as a spare. Now Im waiting to my 75Hz to die as my 60Hz did, and then I will find out if it works.

If anyone give this a try, please post results.

**mscappa** · 12-01-2007, 10:51 AM

holy **** this may just work. I was looking inside the board for an eeprom or some sort of memory jumper i could short but couldn't find one.

I have a new screen right now, but if/when it goes i'll certainly do this.

**nickelaj** · 12-05-2007, 10:24 AM

i bought eby-701
today i made everything ok.
started to setup windows, everything was so good then the screen started to blink and completely got white. resetted pc but it turned itself off and now i cant turn the lcd on.
only power led is (red) blinking. Cant do anything. i am so sad, why can it be ? i cant send it to USA for warranty from Turkey.

i am trying to turn it of standalone but no change . (while installing xp i pressed a button that wrote auto adjusting, but it was installing without a problem) can it be the sam problem ?

**mscappa** · 12-05-2007, 10:31 AM

Originally Posted by nickelaj

i bought eby-701
today i made everything ok.
started to setup windows, everything was so good then the screen started to blink and completely got white. resetted pc but it turned itself off and now i cant turn the lcd on.
only power led is (red) blinking. Cant do anything. i am so sad, why can it be ? i cant send it to USA for warranty from Turkey.

i am trying to turn it of standalone but no change . (while installing xp i pressed a button that wrote auto adjusting, but it was installing without a problem) can it be the sam problem ?

i don't think its the same problem. There have been threads posted on here about the lilli's and the white screen of death. Try searching for it, I think it has to do with a loose ribbon cable inside the casing which is easy to reset.

**nickelaj** · 12-05-2007, 11:13 AM

how can i reset white ribbon ? because i wasnt screw it, it was originally closed

i am so sad

**masch** · 12-30-2007, 05:29 AM

ouchies. This just happened to me 10 mins ago. Haha..

**senseless228** · 01-02-2008, 01:45 PM

how do you make a custom resolution on a s3 graphics chipset?

**blauhung** · 03-02-2008, 09:16 AM

just got me last night. anyone test the new EEPROM?

Also, I sent another email to Lilliput with this thread linked, hopefully they have some more suggestions. EEPROM replacement would be very nasty, hopefully there's someway to reprogram it on the board.

**DanaDeth** · 03-17-2008, 03:16 AM

I just got the dreaded "out of range" problem about an hour ago... I was going for a drive and went to press the brightness button only to accidentally press the auto adjust button, and good bye to 800X600 resolution.

It just so happens that I recently replaced my laptop in my car with an itx desktop, so I quickly swapped the laptop (still configured as it was when it was in the car), and nothing. It does work with 1024X768, although I would really like to get it back to 800X600.

Has anyone tried replacing the 24c16 eeprom chip yet? I would like to give that a shot, but I am afraid of completely destroying my screen when I can just deal with a higher resolution.

I am just glad to see that I am not alone in this