Page 15 of 55 FirstFirst ... 5678910111213141516171819202122232425 ... LastLast
Results 141 to 150 of 548

Thread: Dual DIN LCD touchscreen monitor?

  1. #141
    _
    Join Date
    Mar 2004
    Location
    Little Elm, Texas
    Posts
    13,500
    Is your screen running directly off of the car or off of the computer PSU? If it's not regulated you can be getting some interference.

    Also, your VGA cables should be run away from others as well.
    Jan Bennett
    FS: VW MKIV Bezel for 8" Lilliput - 95% Finished

    Please post on the forums! Chances are, someone else has or will have the same questions as you!

  2. #142
    Newbie SilverSquared's Avatar
    Join Date
    Aug 2006
    Posts
    39
    I got it wired as another HU, tapped into the existing wiring. My VGA cable is ran straight up the middle, and all others are ran to the sides. The only cable with the vga is my RCA out from the SoundBlaster USB. I'm most likely going to get a 10.4" touch screen molded to my dash bezel, relocate the HU to below my A/C controls. That may clean some things up. This is an option i will use if I cant get a flip or dd to work properly.
    CarDomain for my Silverado. Updated 2-20-07!!!
    DropJawMag pic #1 of my truck at ShowFest '06.
    DropJawMag pic #2 of my truck at ShowFest '06.
    DropJawMag pic of my truck at Scrapin The Coast '06.

  3. #143
    MySQL Error scott_fx's Avatar
    Join Date
    Dec 2004
    Location
    Los Angeles Ca
    Posts
    3,994
    Quote Originally Posted by RedGTiVR6 View Post
    sounds like this guy is a perfect candidate to participate in our threads regarding software solutions and sound car options to get us closer to an all in one solution....that is unless he's waiting for someone else to find it so he can benefit from it...

    btw - SilverSquared. The Zapco is deffinately an option. Just beware that the EQ is only 10 bands, not 31 bands.


    hey red...i thought we already found a 31 band software eq?
    New System in progress:
    M10k
    Phaze TD1500 ~> Dynaudio MD130
    Phaze TD1500 ~> Seas g18rnx/p
    Zapco Ref 500.1 ~ 12" tc-9
    Behringer DCX2496 ~ Envision Electronics psu
    Transflective Xenarc

    My Car Pc Install
    My Boat Pc worklog

  4. #144
    MySQL Error scott_fx's Avatar
    Join Date
    Dec 2004
    Location
    Los Angeles Ca
    Posts
    3,994
    Quote Originally Posted by SilverSquared View Post
    I'll definately look into it. I'll do a lil searching for it in a lil bit. 4v is cool. With Zapco's products its most likely a very strong setup.
    if 4v is cool, check out the alpine pxa-h701. hard to beat that thing
    New System in progress:
    M10k
    Phaze TD1500 ~> Dynaudio MD130
    Phaze TD1500 ~> Seas g18rnx/p
    Zapco Ref 500.1 ~ 12" tc-9
    Behringer DCX2496 ~ Envision Electronics psu
    Transflective Xenarc

    My Car Pc Install
    My Boat Pc worklog

  5. #145
    Newbie
    Join Date
    May 2006
    Location
    Norway
    Posts
    21
    Quote Originally Posted by novorado View Post
    This unit is independently available in EU. I am receiving one this week. Will put a review.
    Do you have a adress to the store?

  6. #146
    _
    Join Date
    Mar 2004
    Location
    Little Elm, Texas
    Posts
    13,500
    Quote Originally Posted by scott_fx View Post
    hey red...i thought we already found a 31 band software eq?
    we've found 2, but there's always room for more.

    I'd rather have plenty of options than just 2 to chose from...
    Jan Bennett
    FS: VW MKIV Bezel for 8" Lilliput - 95% Finished

    Please post on the forums! Chances are, someone else has or will have the same questions as you!

  7. #147
    MySQL Error scott_fx's Avatar
    Join Date
    Dec 2004
    Location
    Los Angeles Ca
    Posts
    3,994
    Quote Originally Posted by RedGTiVR6 View Post
    we've found 2, but there's always room for more.

    I'd rather have plenty of options than just 2 to chose from...
    you just like seeing me be indecisive and throwing my money away...dont you?
    New System in progress:
    M10k
    Phaze TD1500 ~> Dynaudio MD130
    Phaze TD1500 ~> Seas g18rnx/p
    Zapco Ref 500.1 ~ 12" tc-9
    Behringer DCX2496 ~ Envision Electronics psu
    Transflective Xenarc

    My Car Pc Install
    My Boat Pc worklog

  8. #148
    Low Bitrate
    Join Date
    Oct 2006
    Location
    Moscow ZAO, Russia
    Posts
    104
    Quote Originally Posted by BurnBow View Post
    Do you have a adress to the store?
    I defintely remember there was an online store in Norway, could not find the link, was in ths forum.
    I am running a software/electronics distribution business, so getting hardware directly from vendor.

  9. #149
    Newbie
    Join Date
    Oct 2006
    Posts
    1

    Dogy eBay listing already been removed

    Hi guys, I've pre-ordered my DWW-6500 today also. Now, I'm hanging out for it to be released. I emailed the company and asked for delivery date information, but I've not had a reply back as yet. Most of you are using the M1000 mainboard, but I've opted for the CN1000 board instead as I have no need for CF card reader and the CN1000 give me FOUR native USB ports which I'll need al of them and the option to add another 8 USB ports by just plugging in the cable. Frankly I don't understand why more people don't go with this particular board. BTW, I see two USB cable in the picture of the DWW-6500. I imageine one to be for the USB Screen interface and the other to be the DVD Drive.

  10. #150
    _
    Join Date
    Mar 2004
    Location
    Little Elm, Texas
    Posts
    13,500
    Quote Originally Posted by scott_fx View Post
    you just like seeing me be indecisive and throwing my money away...dont you?
    Jan Bennett
    FS: VW MKIV Bezel for 8" Lilliput - 95% Finished

    Please post on the forums! Chances are, someone else has or will have the same questions as you!

Similar Threads

  1. FS: Datalux LMV10R 10.4" TouchScreen LCD Display
    By kandyman676 in forum Classified Archive
    Replies: 6
    Last Post: 12-07-2006, 01:09 AM
  2. FS: K90 In-dash LCD Touchscreen Monitor
    By jwoznack in forum Classified Archive
    Replies: 7
    Last Post: 05-14-2006, 03:22 PM
  3. 1020TSV - 10.2" VGA LCD Touchscreen Monitor
    By Dwaine in forum LCD/Display
    Replies: 0
    Last Post: 02-15-2006, 07:53 PM
  4. Dual Monitor Support. Specific Qs
    By maxxell in forum General Hardware Discussion
    Replies: 0
    Last Post: 04-18-2005, 09:38 AM
  5. Replies: 1
    Last Post: 04-10-2005, 05:24 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •