Dww-750fm

**WTFover** · 12-15-2006, 10:25 AM

It's a pretty standard car stereo setup. 3 Pairs of RCA jacks coming from the back of the head unit to the rear of the truck. You have front left+right, rear left+right, and a pair subwoofer out. The front and rear set of jacks run to my Mcintosh 4 x 25 amp. It has an internal crossover. The remaining pair of jacks for the Subs run to a MTX 1500D amp pushing 2 JLAudio 10w6 Subwoofers. This amp also has an internal crossover. Nothing earthshaking here, mine is probably just like a million other basic car stereo installs. The objective here is to replace my current HU with my CarPuter, without purchasing a switching device. I will probably end up just getting a line level converter for it and pumping it in to line in on the carputer.

**frankrizzo** · 12-15-2006, 10:53 AM

I get yah..It's kinda hoaky no matter what. I'll be fallin in the same boat shortly after my last final today. I am deleting my stock HU and possibly factory amp (MONSOON) and using the 750FM. Since I am running a mono sub to a Punch 300.2 amp, I am gonna pull a RR and RL channel to feed it.your main issue is that no matter what you'd stil lneed a pair of line outs to the subs. Yah, i'd say go with the line level....but instead of going line in on carputer, the rca's on the 750 are in...not out.(From everything I've seen so far.) So why not jsut run all your systems INTO the 750 and let it handle all the switching. You can select audio during any video...ok babble now...good luck.

**hohenyi** · 12-15-2006, 11:34 AM

Originally Posted by frankrizzo

I get yah..It's kinda hoaky no matter what. I'll be fallin in the same boat shortly after my last final today. I am deleting my stock HU and possibly factory amp (MONSOON) and using the 750FM. Since I am running a mono sub to a Punch 300.2 amp, I am gonna pull a RR and RL channel to feed it.your main issue is that no matter what you'd stil lneed a pair of line outs to the subs. Yah, i'd say go with the line level....but instead of going line in on carputer, the rca's on the 750 are in...not out.(From everything I've seen so far.) So why not jsut run all your systems INTO the 750 and let it handle all the switching. You can select audio during any video...ok babble now...good luck.

which cable from the 750fm will u used as the amp remote? Thanks

**aggravation** · 12-15-2006, 12:10 PM

Originally Posted by WTFover

...Anyone want a screaming deal on a DWW-750?

Well that depends on how screaming it is

I'm interested.....

**frankrizzo** · 12-16-2006, 01:33 AM

not sure yet. I haven't fully planned it out or anything. currently I am still trying to get my touchkit drivers to work. as of right now my screen is a screen only with no touch input.! i am getting frustrated.

**morris_the_cat** · 12-16-2006, 02:56 AM

I recall that there was a link to the drivers for every major operating system on the digitallww product page. Have you tried that?

**hohenyi** · 12-16-2006, 05:15 AM

the link at DWW to egalax does not work anymore had something to do with the co. being merge??? try this instead http://www.egalax.com.tw/web20/eg/drivers.htm

**frankrizzo** · 12-16-2006, 11:51 PM

yah, i finally figured it out. I dunno why, i tried it on a different USB extension and BINGO! So now i dunno wtf. I am gonna check for damage to wire sheath and what not. seems odd though cause everything been workin fine. But I still have a lot of plans and whatnot for rewiring and crap, so i gotta see. Also, M_T_C are you running an amp and where did you pull the amp on?

**hohenyi** · 12-19-2006, 08:40 PM

Looks like you need to pull a line from the car ACC for the amp remote.

**morris_the_cat** · 12-19-2006, 11:45 PM

Originally Posted by frankrizzo

Also, M_T_C are you running an amp and where did you pull the amp on?

I am not running an amp. I am quite happy with the built in amp within this unit. I honestly do not see the point of using an external amp unless u have an existing system or want crazy power.

Hey, I wanna see some of the installs you other guys have made!