Have you pulled the existing unit and gotten the dimensions? It's hard to tell from the pics, but it looks a bit narrower than a standard DIN HU.Quote:
Originally Posted by fiddy
More than likely you are not going to find a drop-in. But if you check the size, you might find either the WRX kit that has been shown or i've heard about another (Infinity?) kit that may give you something where you have to do minimal custom work.
For example, in my case I need to fit ~ 3/8" of plastic on either side, cut 2 slots in my dash, and shave 1/4" off my trim piece. Not perfect, but much better than trying to fab my own housing.
I will measure tommorow. THanks for the help so far. =)
Thread in the LCD forum of someone else asking about a (06) GTO.
I posted in the LCD forum but here ya go. =)
You are going to have to do some custom work. Both the G35 and WRX options use 7" screens which are about a 1/2" too narrow and appear to be about 2" too short. You might look into an 8" or larger as (assuming they fit) will leave you less space you have to fab a filler for.
all double dins are about the same size. you will either have to resize (cut) part of the dash area, or recase your screen. for most cars the screen casing is about 1/2-1" too tall.
I bought the Double-DIN chassis some months ago, the manufacturer states that it's designed for a Subaru WRX but it's relatively easy to adapt it to other vehicles, as I did with my '03 Nissan X-Trail.
here, be sure to visit babelfish since my Blog is in spanish.
send that picture to the mechatronick owner so he can put it on his site.
So VW, ford mustang, nissan frontier, and now a nissan X-trail
that looks alright in an exy! i did it the hard way.