Thread: ArCom - IVI

Well,

You know BT HFP is still @$!% up, Right?

https://bugs.meego.com/show_bug.cgi?id=9705
https://bugs.meego.com/show_bug.cgi?id=9337
https://bugs.meego.com/show_bug.cgi?id=12649
https://bugs.meego.com/show_bug.cgi?id=7062
https://bugs.meego.com/show_bug.cgi?id=7432
https://bugs.meego.com/show_bug.cgi?id=7433
https://bugs.meego.com/show_bug.cgi?id=7436
https://bugs.meego.com/show_bug.cgi?id=12087

And (having followed the meego effort) promptly maybe an overstatement. They just solved the touchscreen bug, for a set of specific devices, which caused QT and XI2 not to work together. That *fix* only works for screens supported by the tsc2007 driver -- which I'm guessing isn't the majority of guys here.

Originally Posted by simonbolek

This was also noticed by Nasa, xorg.conf file disturbing in /etc/X11/xorg.conf.d/
remove it and it should work. Was calibration working ok?

cheers
simon

ps. this is going to be removed in the coming-up version. It is currently beeing tested with MeeGo 1.2 as OS base.

No calibration was not working, I beleive it says that it was not able to complete it I have to wait till I get home to check, is there a way to get to any of the /etc files even if the system wont boot up into the OS.

After removing the Xorg file the calibration routine would come up but, it would simply loop.

I had to remove the calibration from the startup in order to get the GUI to even display.

Originally Posted by thatguy666

After removing the Xorg file the calibration routine would come up but, it would simply loop.

I had to remove the calibration from the startup in order to get the GUI to even display.

Strange, I will check the sequence again, could you:
1) ls me your /etc/X11/xorg.conf.d/ and the attach input of its files
2) give me your graphics card

cheers
simon

---------- Post added at 02:55 AM ---------- Previous post was at 02:49 AM ----------

Originally Posted by nasa

Well,

You know BT HFP is still @$!% up, Right?

https://bugs.meego.com/show_bug.cgi?id=9705
https://bugs.meego.com/show_bug.cgi?id=9337
https://bugs.meego.com/show_bug.cgi?id=12649
https://bugs.meego.com/show_bug.cgi?id=7062
https://bugs.meego.com/show_bug.cgi?id=7432
https://bugs.meego.com/show_bug.cgi?id=7433
https://bugs.meego.com/show_bug.cgi?id=7436
https://bugs.meego.com/show_bug.cgi?id=12087

And (having followed the meego effort) promptly maybe an overstatement. They just solved the touchscreen bug, for a set of specific devices, which caused QT and XI2 not to work together. That *fix* only works for screens supported by the tsc2007 driver -- which I'm guessing isn't the majority of guys here.

Oh yes I am aware of it alright, but at the moment there is no ather way to go, so i get the best I can. Some of them bugs come from the dialer etc. software itself, and arcomivi does not use it directly.

And yes you are right, this might become an overstatement, but I still have faith in MeeGo Otherwise I could dump my project just right now.
So let us go small steps forward.

cheerios
simon

Originally Posted by simonbolek

This was also noticed by Nasa, xorg.conf file disturbing in /etc/X11/xorg.conf.d/
remove it and it should work. Was calibration working ok?

cheers
simon

ps. this is going to be removed in the coming-up version. It is currently beeing tested with MeeGo 1.2 as OS base.

I am not sure how to get to the /etc/X11 to remove the calibration or xorg.conf file without being able to load the OS and go through the terminal. When I push tab or delete while booting to be able to get to the command line it takes me to the welcome to meego page and I can select tab to edit it it shows the image and where it is at:

vmlinuz-2.6.35.3-10.3-ivi ro root=/dev/sda2 quite vga=current

I have tried various attempts to try and be able to navigate folders to get to the /etc folder but can never get there. Is there another way to try and get to the /etc folder if you are not able to get past the boot sequence mines either freezes with the black screen while and blinking dash while in grub or gets further and goes through a loop and repeats the xorg error and goes into idle every 5 minutes.

I don't have the Xorg file any more as I removed Arcom a while ago.

The video "card" is an Integrated Intel Graphics Atom D510.

Originally Posted by acidflow03

I am not sure how to get to the /etc/X11 to remove the calibration or xorg.conf file without being able to load the OS and go through the terminal. When I push tab or delete while booting to be able to get to the command line it takes me to the welcome to meego page and I can select tab to edit it it shows the image and where it is at:

vmlinuz-2.6.35.3-10.3-ivi ro root=/dev/sda2 quite vga=current

I have tried various attempts to try and be able to navigate folders to get to the /etc folder but can never get there. Is there another way to try and get to the /etc folder if you are not able to get past the boot sequence mines either freezes with the black screen while and blinking dash while in grub or gets further and goes through a loop and repeats the xorg error and goes into idle every 5 minutes.

Wait until it goes to 5 minutes idle and than go to command line with
Ctrl+Alt+F1
use standard MeeGo OS user/password
root/meego
and voila...

cheers
simon

So has anyone tried the new version of ARCOM?
0.9.3