there were two TINY pieces of what i'm assuming was solder rattling. They were small enought to fit where the solder holes are. Nothing else though. I wonder if the two solder points were soldered together :dunno:
i prefered to pass 4 usb from my motherboard...4 pin internal*
j'ai apsser 4 usb de ma motherbaord jusqu'a l'extérieur de mon case.
la motherboard a 4 port usb interne non utiliser donc la je suis rendu a 8 :) ;)
sorry for the french lol
Yeah but those 8 are still powered from your mobo/psu not from the car. Also those with USB gremlins need something external to power up and shutoff independent from the mobo which is the whole point of the product.
And the french wasnt great, but I understood it. Internet translator?
non c'est plutot que je me suis pas forcé, et que j'ai bâclé ce que j'ai écris, au Québec on est influencé par l'anglais alors ca a donné ça .
Ok, i understand now....so some device need to be started before the computer?
ok but if you have a gps..and you have a target to follow...and you go at a shop....at your return you have to put again the destinaiton in the gps?(with cold boot)
I have my M2 set to soft off 30s after into standby, then in 2hours pull the plug into cold boot. I have a deep cycle Optima battery so the constant strain on it is ok. :)