Infill G4 Manual

**RedGTiVR6** · 05-08-2007, 04:49 PM

This post is for the G4 manual. This is a work in progress.

If you see anything in this manual that you feel is missing or is wrong, please post your comments here.

Again, this manual is in DRAFT format. It's is not a final copy.

I will take the suggestions in this thread and apply them as necessary.

**RedGTiVR6** · 06-19-2007, 03:54 PM

Updated 6/19/2007

Included the following:

Polarity of the reverse sense camera wire (+12v)
Better information about the illumination wire
Picture with information about the back of the G4.
Support contact information and links
Information about the USB 2.0 ports

Still to add:

Information about the remote with an image of the remote

**JasonMK** · 07-05-2007, 10:33 PM

Thanks for the latest update to the manual. I'm assuming it is not just my computer, but the links at the end are broken up such that clicking on them does not work, you need to cut and paste anything on the 2nd &/or 3rd line. Certainly not critical, especially once it is printed off, but just thought I'd bring it up.

Also, the link in the manual points to a page that has a link with a typo in it. At the bottom of this page it directs you to

http://www.mp3car.com/vbulletin/mp3c...-car-computer/

when it should be

http://www.mp3car.com/vbulletin/mp3c...-car-computer/

(hypen added between double-din)
...mp3car.com/vbulletin/mp3car-infill-g4-double-din-car-computer/
...mp3car.com/vbulletin/mp3car-infill-g4-doubledin-car-computer/

The truth is I have nothing but free time on my hand until my G4 ships and I get to install it, so if anyone has anything for me to proof read in the meantime send it my way.

**RedGTiVR6** · 07-05-2007, 10:42 PM

I've fixed the issues with the manual listing in the downloads section.

The issue with the links at the end of the manul appears to have to do with the way Adobe converts the word document. In word, the links work.

I'm not sure there is anything I can do about this unfortunately.

**RedGTiVR6** · 07-05-2007, 10:49 PM

ok - I changed the way the support page is shown and I adjusted the links at the first of the manual as well.

**JasonMK** · 07-12-2007, 12:39 AM

I was looking through the manual (as I've been doing every night since I placed my order), but today I was actually readining it after I installed my G4 (yay!). On page 8 & 9 of draft 7.5 you have the following swicthed from the pictire to the description below.:

#20 is labled as wiring harness (which is #23)
#22 is labled as the USB dongle
#23 is labled as...well, there is no description for #23, but if you read #20 you'll find it.

This might not make sense, but you'll see what I mean. Thanks again for all that you guys do. My install this afternnoon couldn't have gone any smoother, I'm loving it.

**RedGTiVR6** · 07-13-2007, 07:02 PM

Manual updated!

Thanks for the heads up!

**RedGTiVR6** · 07-20-2007, 11:25 AM

Updated to include information about the mic being a stereo port (rather than mono).

**Fiberoptic** · 09-07-2007, 12:27 PM

"Light Blue - Hand Brake. This lead

needs to be wired up as a safety
feature. It will sense when the hand
brake is applied and will cause
certain features of the software to be
enabled when engaged."

Is this looking for a negative or a positive wire? This is not clear in the manual.

**jaybirdsu** · 12-28-2007, 08:53 AM

Where are the specs for the CPU, MB, HD brand, RAM, etc? If I am buying a computer for over 2k I would like to know what I am getting.

Thread: Infill G4 Manual

LinkBack

Thread Tools

Search Thread

Display

Infill G4 Manual

Where are the Computer Specs

Similar Threads

Infill G4 - Now Shipping

INFILL G4 - Australian and New Zealand Questions Answered

Infill G4 Centrafuse install

Infill G4

Bookmarks

Bookmarks

Posting Permissions