Advice/Help for a First Timer...
So I have the base set up for a new system in my car.
I am still working on the pc itself, but I have some questions before I complete that build.
Mainly, do I need a sound card, or can I get away with the on board audio of this motherboard.
Other then that my system consists of the following...
JL W1v 10" Sub
Alpine PDX-5 75w x 4 and 300w x 1 amp
Tsunami Lite Wave Capacitor
JL TR050-CT1/2" Tweaters (possibly two sets one for up high one for the floor boxes)
JL TR600-CXi 6 1/2" 2-way speakers
JL TR525-CXi 5 1/4" 2-way speakers
What I am considering in addition to this, depending on the requirements, is adding 2 more 6" speakers wedged in the front right and front left corners of the floor area in the passenger and drivers side of the car. In addition to the 6"ers I would add 2 more tweeters.
So in total up front, there would be the door speakers, the floor boxes, and then the tweeters up high.
In the back there would be door speakers, and speakers in the very rear on the roof and then the sub mounted in the back next to the right rear window.
All of this would be attached to a car pc somehow, no idea how it would need to be set up, wether through a sound card, or just the built in.
Also no idea how the wiring of it all would need to be laid out/fused.
I will be running it right from the red top under the hood, also have no idea how to best do this. I want to avoid splicing into lines that are already there AT ALL COSTS.
Any advice is greatly appreciated.