Results 1 to 9 of 9

Thread: 1997 F-150, Needs a new friend... New to Car Modding.

  1. #1
    Newbie
    Join Date
    Jul 2007
    Posts
    3

    1997 F-150, Needs a new friend... New to Car Modding.

    I decided to join these forums when I saw that there was actually someone knowledgeable about laptop LCD screens here enough to have posted something that answered a question ive had for years. (No you cannot take a laptop LCD, solder some stuff onto it and make it work with a desktop)

    With that said. I have a 1997 Ford F-150 that id like to do a little bit of modding and adding a more modern touch to it. For some back ground information on myself, I am a computer tech, so when it comes to fixing, and hardware im knowledgeable. As for soldering things together, thats a different matter.

    If you take a look at a picture of a F-150's interior, you will notice that the location of the Radio, Air condition, ect, is a perfect square. To me that screams out "Put an LCD HERE" Id like to see about removing all of those old clunky controls and replace it with an LCD that is controlled by an analog stick that you control with your thumb on the steering wheel. I was thinking as far as making it a computer with the ability to record video from CCTV cameras that are hooked up around the truck.

    But first, ill let you guys talk to me, and find out the practicality of the situation. One barrier I see, is turning the currently switches and knobs, into computer controlled devices... Seems like i have alot of modding to do with little motors/servos or something.

    Anyone able to shed some light on this type of modding?

  2. #2
    Constant Bitrate
    Join Date
    Dec 2006
    Posts
    149
    Yep, it sure does, thats what I did to mine, moved the AC unit and radio into a custom build center console. And the Molded a 8 inch lilliput touch screen into it.
    [media]http://www.etc-nc.com/Memberspage/Russ/russ008.jpg[/media]

  3. #3
    Newbie
    Join Date
    Jul 2007
    Posts
    3
    Ohhh, Now that I like!

    I ended up picking up a little 7.2 wide LCD from a pawn shop for 20 bucks (It was 40) its a little junker but I figure It will hold me over for awhile until I decide to put some real cash into it.

    I never though of putting that dash in the middle, very smart idea.

    What sort of issues did you run into with wiring and such to that middle console? Minus the screen, what were the costs you ran into to make this project happen.

    One of my biggest concerns is that this system would be in the truck here in Alaska. During the winter (About 1 week away) it will easily get down to 10*F, during the middle of the winter It is not uncommon to see temps at -40*F and as low as -60*F (-70 if we have some records) Meaning I would have to look for equipment that can AT THE LEAST, be able to be stored in those sort of harsh temps, and if possible run at them. The upside is that I do not have to worry about a computer system overheating, the downside is Condensation comes into play as well.


    One last thing... Tools, anything special needed tool wise to take the consoles out? Perhaps a special Ford propritary tool

    Thanks for sharing your pics, I thought no one would have answered me You gave me a new direction for this possible project

  4. #4
    Constant Bitrate moboman's Avatar
    Join Date
    Sep 2007
    Location
    Cincy, OHIO
    Posts
    114
    Welcome Haemon, I'm new here too.

    How do you like living in Alaska?

    If you want to dedicate your computer to cctv camera recording, Vpon makes a pci card and a IDE Flash that you use.
    http://www.vpon21.com/index.htm

    Enjoy car computing
    My Worklog
    I'm using my carputer 100%, but I still need to make it easier to use.

  5. #5
    Newbie Guinnessdawg's Avatar
    Join Date
    Jul 2004
    Location
    Richmond, VA
    Posts
    30
    If it helps...check out my pictures. I turned the 60/40 bench seat into two buckets, added a Navigator center console. Molded the AC controls into the console (still needs finishing), moved the HU to the console (used an upside down Navigator rear seat overhead AC control console cover to cover the HU).
    ________________________________
    Pentium III
    601mhz, 288gb RAM
    60gb hard drive @7800 RPM (upgraded from 5gb!)
    nlited Windows XP pro
    Gateway Solo 2150 laptop
    power switch extended
    8" Lilli molded in-dash


    project 75% complete

  6. #6
    Constant Bitrate
    Join Date
    Dec 2006
    Posts
    149

    For sale...

    Haemon,

    I'm thinking about selling my screen setup.
    Would you be intererested? I want to upgrade to a 10.4 inch screen. I already have the new bezel and screen, but wanted to sell it.
    I know a few people locally that want to buy it. But I am the only one that has a setup like this at car shows around here. And it I sell it to somebody locally, that my wow factor disappears. Know what I'm saying?

  7. #7
    Newbie
    Join Date
    Jul 2007
    Posts
    3
    Hmmm... thats a thought. What sort of climate has it been subjected to. Could you send some of that wow fator my way in the form of pics . If all things allowing, what sort of price are you looking for them and what do you propose for shipping to Alaska?

    To answer the above questions... I don't care too much for the winters when I can't get on my snowmobiles and race across the snow. Sucks that gas prices have hit a high like they have, makes it not to practical to go zipping around on my sled.

    Im also starting to question whether the majority of the displays and systems out there would last in the truck seeing as it is not garaged and is subjected to sub -40*F weather from time to time.

  8. #8
    Constant Bitrate
    Join Date
    Dec 2006
    Posts
    149

    Talking ?

    I was looking to get $275.
    Thats how much I payed for the monitor and then I molded it.
    Not sure about shipping, but if its not incredible expensive I'll ship it for free.
    Thats if I get $275
    I can send you some pics.
    Get me your email address and I will go out there and send them from my IPhone.
    Not entirely sure about the tempature.
    I'm not sure that I could last at negative 40 below...
    I have when it gets to freezing here.
    It has been like at 10 degrees before with no probs.
    LEt me know what you want to do.

    Contact me at oxleyr@gmail.com

  9. #9
    Constant Bitrate
    Join Date
    Dec 2006
    Posts
    149
    I lowered the price to $200....
    Still want it?

Similar Threads

  1. Electric shock car alarm system !!!!!!!!
    By jthiani in forum General MP3Car Discussion
    Replies: 127
    Last Post: 04-22-2011, 09:35 PM
  2. What's your dream car?
    By Aaron Cake in forum Off Topic
    Replies: 172
    Last Post: 10-02-2007, 07:34 AM
  3. $15k damaged caused because of a "joy ride"
    By Tx_Cat in forum Off Topic
    Replies: 12
    Last Post: 12-29-2006, 06:09 PM
  4. Car Stereo Installation Video's for Sale
    By johnram in forum Classified Archive
    Replies: 2
    Last Post: 09-05-2002, 10:27 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •