Will this work with an adapter?
I have a 97 Lexus SC 300 and I would like to install a carputer. I have looked all throughout this forum and feel I have gethered enough information to get started. However I just want to make sure I understand everything in terms of hooking everything up since I do not have much experience with car audio.
My car has an external amp and I found an adapter (http://www.installer-data.com/item/d...php?it=70-8112)
I looked at this thread http://www.mp3car.com/vbulletin/the-faq-emporium/32430-how-to-get-sound-from-pc-to-car-stereo-amp.html and by that I assume I can use ppgt94's 1st diagram to connect to the speakers with the RCA cables that come with the adapter.
Now I am a little fuzzy on the rest:
Lets say I am going to use the Opus 120W. My understanding:
Run lead from battery to Opus (yellow: power (+)). Tie off yellow on adapter (not used)
Connect black wire from adapter to Opus (black: ground)
Connect red wire from adapter to Opus (red: ignition)
Connect Blue/White wire from adapter to Opus (blue: remote turn-on)
Tie off the rest of the adapter wires (not used)
Is this correct or am I not understanding everything right? Please help me out.
Thank you very much.