Dang Chevy

**BoyNextDoor** · 05-26-2005, 05:50 PM

[vent mode]
We bought a '94 Chevy G20 Work van (pic l8tr) to have a workhorse. We just exchanged the fuelpump, and foun out that one of the 6 pistons ain't working at all! so the Mechankic sad we need a new engine.

It's still running, but it's backfiring a lot, and such. I just did a full tune-up on it, and it runs much better than when we bought it. now with this good news, i don't know what i should do... Any ideas? I was thinking we could replace the engine if we find one cheap, my dad already did a job like that on a van like this, and would save tons of monay. Other ideas? Damn cheap thing!

cheers
[/vent mode]

**WebDog** · 05-26-2005, 08:13 PM

Originally Posted by BoyNextDoor

[vent mode]
We bought a '94 Chevy G20 Work van (pic l8tr) to have a workhorse. We just exchanged the fuelpump, and foun out that one of the 6 pistons ain't working at all! so the Mechankic sad we need a new engine.

It's still running, but it's backfiring a lot, and such. I just did a full tune-up on it, and it runs much better than when we bought it. now with this good news, i don't know what i should do... Any ideas? I was thinking we could replace the engine if we find one cheap, my dad already did a job like that on a van like this, and would save tons of monay. Other ideas? Damn cheap thing!

cheers
[/vent mode]

Why not rebuild the engine?

**wizardPC** · 05-26-2005, 08:34 PM

You and I must shop at the same car lots

I got home tonight and noticed a rather large puddle of brake fluid underneath my bronco. :sigh:

**lostreception** · 05-26-2005, 09:08 PM

as a van guy id say rebuild it dont do what i did.
i blew my 1st engine by not putting oil in it ( i was 17) then i bought a brand new crate motor and got it mounted) 3k later and 5 mos later. i was happy. now however i wish i would have gotten it rebuilt. instead i wish i had gotten a larger worked engine to put in it with some modifications and such.
but id say yea its in good shape otherwise from when i saw it on sunday
if youve done it before itll be fun.
hell ill come out there one day and you can show me how to tune up this beast as well and ill get some more cheap gas

**BoyNextDoor** · 05-26-2005, 09:17 PM

no problem, we can set something up. what size engine do you have? i can help you tune it up...

**lostreception** · 05-26-2005, 09:23 PM

its a V8 5.7 ltr 350 and loves gas (this is not an invitation however for 0l33l
to post however)

**BoyNextDoor** · 05-26-2005, 09:48 PM

i have the 262 4.3L and i takes about 10MPG with 5 pistons working, and backfiring a lot...

**0l33l** · 05-27-2005, 01:22 AM

Ummm.... sounds like a good place to drop in a Chevy 350.

**lgbr** · 05-27-2005, 01:30 AM

4.3's can be found for VERY VERY cheap. Go to a u-pull-it junkyard. I'm sure you could find one. However, if your engine block is ok, just do a rebuild.

**Hcomplyr** · 05-28-2005, 01:10 PM

if you don't mind the extra work try to find a 4.2 I6 trailblazer engine, its got an extra 70 HP (over the 4.3 V6) and it should get a solid 18 miles to the gallon in the city in the lighter van, but the 350 is a no brainer. if your really concerned about gas toss in a 3.8L V6 it has slightly less torque (~20 less) but gets 19 city 30 highway in a 3500 pound car