Thread: SonyEricsson Phones

Originally Posted by JanneZ

I installed PhoneControl and IrComm driver and connect my P800 with infrared. I can call to people and see Sim-Card phone book but when trying to send SMS, program is giving an error message. Am I doing something wrong or is there some settings for sms or restrictions in phone number that prevents me to send sms?

Please try to send a SMS again and when the error occurs, send me the logfile (PhoneCtlLog.txt). Then I can tell you more

Originally Posted by zorro

Please try to send a SMS again and when the error occurs, send me the logfile (PhoneCtlLog.txt). Then I can tell you more

I attached log and my configfile.
Log shows first making a call and then sending sms.

I noticed that I can call and answer calls but the hangup button dont work and i dont see caller info and cant see battery status and cant send sms and when i get sms it does not show.

I would really love to use this awesome program, I have SonyEricsson P800 (Symbian UIQ) and really dont want to change it so please help.

I first tried with bluetooth and it did'nt work and then cable and same happened and finally with infrared connection i got it to communicate.

Originally Posted by JanneZ

I attached log and my configfile.
Log shows first making a call and then sending sms.

I noticed that I can call and answer calls but the hangup button dont work and i dont see caller info and cant see battery status and cant send sms and when i get sms it does not show.

I would really love to use this awesome program, I have SonyEricsson P800 (Symbian UIQ) and really dont want to change it so please help.

I first tried with bluetooth and it did'nt work and then cable and same happened and finally with infrared connection i got it to communicate.

Ok.
1. Your phone, for what reason so ever, can't handle any SMS AT-Command. I didn't see such before but in some ways it make sense. A Dial-Up usually does not need any SMS functions.
2. The battery info won't show up until the battery level is sunk below 60%. Your battery level is shown as 64%.
3. For the missing caller info I'd need a logfile where you make and receive a call.
4. For the hang up problem try to set this one in your config file within the Communication settings:
<Hangup>*EVH</Hangup>
5. You also might set the <UseCPAS>True</UseCPAS> and set the <UseCLCC>False to prevent errors.

I will do a bit research on the SMS problem and tell you when I've found something.

MAGIC!!! That's what this program is. Set up my BT drivers with a COM port as COM4, edited your XML config file, fired up Phone Control, and everything was magically there and appears to work. UNBELIEVABLE SOFTWARE!!!!
Can't wait to get this all installed in the car . Thanks again Zorro!

You're welcome

Originally Posted by zorro

Ok.
1. Your phone, for what reason so ever, can't handle any SMS AT-Command. I didn't see such before but in some ways it make sense. A Dial-Up usually does not need any SMS functions.
2. The battery info won't show up until the battery level is sunk below 60%. Your battery level is shown as 64%.
3. For the missing caller info I'd need a logfile where you make and receive a call.
4. For the hang up problem try to set this one in your config file within the Communication settings:
<Hangup>*EVH</Hangup>
5. You also might set the <UseCPAS>True</UseCPAS> and set the <UseCLCC>False to prevent errors.

I will do a bit research on the SMS problem and tell you when I've found something.

OK, here is new log and config attachedfor caller id prob.
I first made a call to my friend and the hangup (wich works now) and then my friend calls me and i hang up and then my firend calls again and i answer and finally i try to send an sms message.

Thanks for trying to solve these problems with me..
Cheers

Originally Posted by JanneZ

OK, here is new log and config attachedfor caller id prob.
I first made a call to my friend and the hangup (wich works now) and then my friend calls me and i hang up and then my firend calls again and i answer and finally i try to send an sms message.

Thanks for trying to solve these problems with me..
Cheers

I've found the AT-Command list specifically for the P800/P900 and it reflects the behaviour I can see in the log.
As I told you already, SMS commands aren't supported at all (but now it's official).

So there is nothing I can do on this issue. Hopefully, SE will release a new firmware some day, which is able to cover the SMS and stuff.
You may call the SE support hotline and ask for such upgrade. Maybe they already have it.

Tell me, were you able to read the phonebook or did you modify it manually?

Originally Posted by zorro

I've found the AT-Command list specifically for the P800/P900 and it reflects the behaviour I can see in the log.
As I told you already, SMS commands aren't supported at all (but now it's official).

So there is nothing I can do on this issue. Hopefully, SE will release a new firmware some day, which is able to cover the SMS and stuff.
You may call the SE support hotline and ask for such upgrade. Maybe they already have it.

Tell me, were you able to read the phonebook or did you modify it manually?

OK, thats for the SMS then but what about that caller id problem?
And there was still some errors from +CNMI? at errorlog, whats it for?

Originally Posted by JanneZ

OK, thats for the SMS then but what about that caller id problem?
And there was still some errors from +CNMI? at errorlog, whats it for?

Is the callers number in your phonebook the same as shown in the log (with the leading 0)?

The +CNMI is a notification request for incoming SMS...