Page 1 of 4 1234 LastLast
Results 1 to 10 of 36

Thread: Getting a v551 to work

  1. #1
    FLAC edrex's Avatar
    Join Date
    Dec 2004
    Location
    West Chestinghamshire, UK init!!
    Posts
    1,088

    Question Getting a v551 to work

    I know a few people have done this phone, but I can't get mine going.

    Here's what happens: I installed the patched Widcomm files and drivers. The Bluetooth can connect to my phone if I select it as a handsfree device on the phone.
    I have also edited the settings in Phoco to match those of other users that have gotten this phone to work (Thanks LostReception!).
    When I open Phoco it goes into the splash screen and goes through the initializing modes. When it gets to "Resetting Phone" it stays there for a few seconds then flashes "Initializing Phone", then back to "Resetting Phone" and loops like that without moving on. The program will load behind the splash screen and if I click on it the splash screen goes away, but the program is slow to respond and seems like its still doing the "resetting" process in the background.

    If anyone has advice on this to get it running let me know.
    Zorro, I know you don't trying to support phones that aren't on the list for people that have not bought the program, but I promise you that the second I get this to work I will be buying the program!! Plus, it opens up a whole group of people with this phone to become your customer.

    Cheers.
    Spent so far: $1,755
    Check Out My Work Log for Specs/Pics
    CarPC Progress[!!!!!!!!!!!!!!].....Installation[---------+].....Pastrami Progress[!!!!!!!!!!!!!!]
    Don't mess with Texas.
    It's not nice to pick on retards!

  2. #2
    FLAC edrex's Avatar
    Join Date
    Dec 2004
    Location
    West Chestinghamshire, UK init!!
    Posts
    1,088
    Anyone?
    Spent so far: $1,755
    Check Out My Work Log for Specs/Pics
    CarPC Progress[!!!!!!!!!!!!!!].....Installation[---------+].....Pastrami Progress[!!!!!!!!!!!!!!]
    Don't mess with Texas.
    It's not nice to pick on retards!

  3. #3
    Variable Bitrate
    Join Date
    Nov 2004
    Location
    NYC
    Posts
    348
    I'll post my config settings for my v551 as soon as I get home.

  4. #4
    FLAC edrex's Avatar
    Join Date
    Dec 2004
    Location
    West Chestinghamshire, UK init!!
    Posts
    1,088
    LostReception sent me the settings that you sent him. I put those in already.
    Maybe a quick guide on what I should do to start it up (ie: do you select the CarPC as a "handsfree" on the cell phone to get the BT connected, or is there another way to have it connected? Are there any Widcomm settings I need changed?)
    Thanks for the help.
    Spent so far: $1,755
    Check Out My Work Log for Specs/Pics
    CarPC Progress[!!!!!!!!!!!!!!].....Installation[---------+].....Pastrami Progress[!!!!!!!!!!!!!!]
    Don't mess with Texas.
    It's not nice to pick on retards!

  5. #5
    Variable Bitrate
    Join Date
    Nov 2004
    Location
    NYC
    Posts
    348
    Is your phone responding at all whenever you open PhoCo?

    You should not connect the computer to the phone using any BT service to have PhoCo work. As soon as you start PhoCo, it will automatically attempt to connect to the phone via the Bluetooth Serial Port service. If the connection is successful, you'll see that the phone's display will light up and the BT indicator will come on.

    I suggest you delete your PhoCo config file and create a fresh one. You can see what com port the BT serial port is on, by looking at the BT device configuration applet or you can try all of the com ports starting with 1. Work your way up until you find the one that the BT serial port is on. When changing the com ports, edit this entry directly in the config xml file.

  6. #6
    Variable Bitrate
    Join Date
    Dec 2004
    Location
    Miami, FL
    Posts
    441
    Hey man, when you get this working, please post any and all information you get in making it happen. I have a v551 and am planning phoneco shortly. I have put off buying phoneco and getting it all up and running because I dont have time to deal with the hassle if it doesn't work.
    A car without turbo is a car with perpetual lag.

    My Ride
    My New Page

  7. #7
    Variable Bitrate
    Join Date
    Nov 2004
    Location
    NYC
    Posts
    348
    My problem is that I haven't had any problems since I figured out the steps I took when I got my phone working 100% with PhoCo. I've tried 3 different computers and all work fine.

    I'll install everything from scratch (no BT drivers, apps or PhoCo) on my laptop and make notes of everything I do.

  8. #8
    Variable Bitrate
    Join Date
    Nov 2004
    Location
    NYC
    Posts
    348

    Guide to using PhoCo with v551

    Some of these steps may seem inane, but some things are easily overlooked.

    I. Install the BT drivers and software that came with your BT adapter.

    II. Pair your phone with the BT adapter. Make sure you have Dial-up Networking available as a service in your phone. If you open up your BT Manager, you should see it in the list of "Bluetooth Places". If you don't, go to your Control Panel->Phone and Modem Options and make sure that "Bluetooth Modem" shows up under the Modems tab. If it shown here, you will also see what com port the modem is attached to and can check other details by highlighting the "Bluetooth Modem" and clicking on Properties. In the properties window, under the Diagnostics tab, you can query the modem and see the details. When I queried my phone, I saw some GSM info and the model phone.

    III. Install PhoCo and run. In the setup, set the com port to the same com port that was noted in the Phone and Modem Options window.

    IV. At this point, whenever you run PhoCo, your phone's BT indicator should turn on. If it doesn't, double check the com port usage in the Modem Options window and the com port listed in the PhoCo config file.

    If you see that PhoCo is connecting to your phone, but you cannot see your address book even after refreshing or the other buttons do not work, then you need to play around with the PhoneBookLocation elements and attributes in the PhoneCtl.Config.xml file. Pasted below is what I have in the Motorola section of my config file. I have tried this with two different BT adapters(one was a DLink and the other a Belkin) and a v551, v80 and v600. I could not get the battery and signal status indicators to work.

    <Communication id="Motorola">
    <Port></Port>
    <Setting>38400,N,8,1</Setting>
    <Vendor>Motorola</Vendor>
    <PhoneBookLocation id="1" timeout="60" name="Tel" static="True" startup="True" shortcut="True">AD</PhoneBookLocation>
    <PhoneBookLocation id="2" timeout="60" name="SIM" static="True" startup="False" shortcut="True">SM</PhoneBookLocation>
    <PhoneBookLocation id="3" timeout="30" name="RC" static="False" shortcut="True" sorted="False" showDate="True">RC</PhoneBookLocation>
    <PhoneBookLocation id="4" timeout="30" name="DC" static="False" shortcut="True" sorted="False" showDate="True">DC</PhoneBookLocation>
    <PhoneBookLocation id="5" timeout="30" name="MC" static="False" shortcut="True" sorted="False" showDate="True">MC</PhoneBookLocation>
    <UseCharset>8859-1</UseCharset>
    <UseClip>True</UseClip>
    <UseCLCC>True</UseCLCC>
    <UseCNMI mode="2,1">True</UseCNMI>
    <Keypad quote="True" terminate="False">-MVTS</Keypad>
    <PBRead>+MPBR</PBRead>
    <SMSStore>ME</SMSStore>
    <IgnoreMS>True</IgnoreMS>
    <Dial>DT</Dial>
    <Hangup>h0</Hangup>
    <UseCBC>True</UseCBC> <!--==Battery Status indicator=-->
    <UseCSQ>True</UseCSQ> <!--==Signal Quality indicator==-->
    <Keys>
    <Key id="Key_0">0</Key>
    <Key id="Key_1">1</Key>
    <Key id="Key_2">2</Key>
    <Key id="Key_3">3</Key>
    <Key id="Key_4">4</Key>
    <Key id="Key_5">5</Key>
    <Key id="Key_6">6</Key>
    <Key id="Key_7">7</Key>
    <Key id="Key_8">8</Key>
    <Key id="Key_9">9</Key>
    <Key id="Key_Star">*</Key>
    <Key id="Key_Hash">#</Key>
    <Key id="Key_VolUp">U</Key>
    <Key id="Key_VolDown">D</Key>
    <Key id="Key_Up">:X</Key>
    <Key id="Key_Down">:C</Key>
    <Key id="Key_Left">:L</Key>
    <Key id="Key_Right">:R</Key>
    <Key id="Key_Enter">:J</Key>
    <Key id="Key_Back">E</Key>
    <Key id="Key_Clear">S</Key>
    <Key id="Key_FK1">[</Key>
    <Key id="Key_FK2">M</Key>
    <Key id="Key_FK3">]</Key>
    <Key id="Key_FK4">:T</Key>
    </Keys>
    </Communication>

  9. #9
    FLAC edrex's Avatar
    Join Date
    Dec 2004
    Location
    West Chestinghamshire, UK init!!
    Posts
    1,088
    Thanks for all the info!!
    I don't have time to go through a reinstall today, but will try it in the morning.
    One question: You say install the drivers that came with the BT dongle... can I use the Widcomm drivers instead? I thought I read somewhere to install those instead of the ones that came with the BT so thats what I did.
    Anyway, I think the Modem connection part is what I am missing, so I will double check all that stuff. Thanks again for the help!
    Spent so far: $1,755
    Check Out My Work Log for Specs/Pics
    CarPC Progress[!!!!!!!!!!!!!!].....Installation[---------+].....Pastrami Progress[!!!!!!!!!!!!!!]
    Don't mess with Texas.
    It's not nice to pick on retards!

  10. #10
    FLAC edrex's Avatar
    Join Date
    Dec 2004
    Location
    West Chestinghamshire, UK init!!
    Posts
    1,088
    Ok. I tried that. I think I got the PC and phone paired, but every time I try to get a connection between the two of them (by double clicking on the Dial Up icon) I get a "Error 633: Com Port is already open or in use, or modem is not configured properly" message.
    If I open Phoco with no connection between the PC and phone it comes up with the splash screen and then the whole screen flashes a couple times and then Phoco is gone.
    I will mess with it later today (have to clean the garage now) but if anyone can help with this that would be awesome!
    Thanks.
    Spent so far: $1,755
    Check Out My Work Log for Specs/Pics
    CarPC Progress[!!!!!!!!!!!!!!].....Installation[---------+].....Pastrami Progress[!!!!!!!!!!!!!!]
    Don't mess with Texas.
    It's not nice to pick on retards!

Page 1 of 4 1234 LastLast

Similar Threads

  1. Stealthy surfing at work?
    By e_z_street in forum Off Topic
    Replies: 15
    Last Post: 10-07-2009, 02:30 AM
  2. Prison vs Work
    By ACHIEVER in forum Off Topic
    Replies: 20
    Last Post: 04-15-2005, 01:53 PM
  3. cannot get lilli touch to work anymore
    By delussional77 in forum LCD/Display
    Replies: 12
    Last Post: 10-12-2004, 12:52 PM
  4. Has anyone gotten a sproggy to work with EPIA boards?
    By rbarr110 in forum Power Supplies
    Replies: 26
    Last Post: 05-10-2004, 06:33 PM
  5. Replies: 4
    Last Post: 11-18-2002, 08:59 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •