Page 59 of 114 FirstFirst ... 9495051525354555657585960616263646566676869109 ... LastLast
Results 581 to 590 of 1134

Thread: Custom USB tyre pressure monitoring interface

  1. #581
    Newbie
    Join Date
    Jul 2008
    Posts
    5
    I was thinking of just buying the sensors, obtaining the chips from the board myself, and making one.

  2. #582
    Variable Bitrate
    Join Date
    Jan 2008
    Location
    Southern Calif
    Posts
    423
    Do you guys think where u mount your receiver/pic board matters on the car? I noticed that my rear wheels read 30PSI when I know there's like 45PSI on them. The front wheels are measuring fine.

  3. #583
    The Last Good Gremlin GizmoQ's Avatar
    Join Date
    Nov 2004
    Location
    St Louis
    Posts
    2,344
    Quote Originally Posted by LYHTSPD View Post
    I have two USB interface boards (populated pcb, programmed PIC, enclosure, and 6ft USB cable) left. If you are interested in one, shoot me a PM.
    I'll take one. Respond to my PM with terms.
    HARDWARE: Fujitsu Stylistic ST5111w/WiFi and dock, internal Hitachi 500G HD, external 1TB HD, Sierra Wireless Aircard 550, DVD-RW, BoomzBox HD radio, XM Commander, Delorme GPS, Saitek X-52 Pro joystick, BluSoleil Bluetooth, TPMS, FB, Elm327

  4. #584
    Maximum Bitrate Robby BMW's Avatar
    Join Date
    Aug 2005
    Location
    Italy
    Posts
    558
    Quote Originally Posted by rgarjr View Post
    Do you guys think where u mount your receiver/pic board matters on the car? I noticed that my rear wheels read 30PSI when I know there's like 45PSI on them. The front wheels are measuring fine.
    It is due to a bad signal reception from the rear tire sensors, as the system stores the latest data received, if it is unable to receive fresh data, it will display the latest values received.
    Try to place the receiver in a different location.
    _______________________________________
    Car installation 95% [■■■■■■■■■■■■■■■■■■■]
    Current project: Parking sensor USB interface

  5. #585
    Newbie
    Join Date
    Nov 2006
    Posts
    16
    So is anybody selling a complete kit for this? If so can someone point me in the right direction.

    Thank you.

  6. #586
    Lok
    Lok is offline
    VENDOR - Portal Media Lok's Avatar
    Join Date
    Feb 2008
    Posts
    152
    we are working on a complete kit. i will give you a link to some pictures and other information once it is complete. the kit will not require you to purchase the 3rd eye tpms kit and will not have to do any assembly (no cutting or soldering). should be available for under $200 with the sensors in a couple weeks.

  7. #587
    Maximum Bitrate S4Per's Avatar
    Join Date
    Jan 2004
    Location
    Seattle, WA
    Posts
    782
    Quote Originally Posted by Lok View Post
    we are working on a complete kit. i will give you a link to some pictures and other information once it is complete. the kit will not require you to purchase the 3rd eye kit nor do you have to do any assembly (no cutting or soldering). should be available for under $200 with the sensors.

    now we're talkin'

  8. #588
    Newbie
    Join Date
    Jun 2008
    Posts
    47
    Hey i am pretty good at soldering and everything and have been reading through all the posts. The USB board doesn't look that bad to make. I dont know how to go about making or buying the 3rd eye board. Does anyone have the schematics to build it or have one?

    thx. IM in to buy a kit if they come out before i go experimenting lol. Let me know when the kits are available and for how much.

  9. #589
    Newbie Kadyroff's Avatar
    Join Date
    Sep 2007
    Location
    Moscow, Russia
    Posts
    49
    Quote Originally Posted by Lok View Post
    we are working on a complete kit. i will give you a link to some pictures and other information once it is complete. the kit will not require you to purchase the 3rd eye tpms kit and will not have to do any assembly (no cutting or soldering). should be available for under $200 with the sensors in a couple weeks.
    Pl. put me in the list, I am really interested in buying this "complete" kit.
    project progress:
    Planning.......[--------X-] 90%
    Parts............[-------X--] 80%
    Fabrication....[------X---] 75%
    Installation...[-------X--] 80%
    Worklog

  10. #590
    Low Bitrate
    Join Date
    May 2008
    Posts
    69
    I'm also keen for a complete kit, there should be more people out there doing stuff like this to sell all the needed components.

Similar Threads

  1. Core Duo / Core 2 Duo Mini-ITX boards
    By RedGTiVR6 in forum General Hardware Discussion
    Replies: 153
    Last Post: 10-03-2010, 10:30 PM
  2. USB self powered hub, which one
    By htsource in forum General Hardware Discussion
    Replies: 5
    Last Post: 07-26-2007, 03:31 PM
  3. Will this layout with a remote USB hub work?
    By NoPistonPC in forum General Hardware Discussion
    Replies: 14
    Last Post: 08-21-2005, 03:24 PM
  4. USB Earthmate - patch for gpsd support
    By dignome in forum GPS
    Replies: 4
    Last Post: 04-05-2005, 10:44 AM
  5. Replies: 4
    Last Post: 04-06-2004, 09:52 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •