Thread: Wich DC=>DC PSU to build ?

If you have enough room for a "normal" ATX PSU, and aren't afraid of doing some heavy thinking I would suggest a presslab conversion. I love it cost me quite sometime to get it working the way I wanted (correctly ) In all it cost me about 20 Euro and an old ATX PSU (welll two actually and a AT, I first tried one ATX but I lost my notes during moving so I started again with a AT to see if it really worked before buying another ATX)

Marsjell !

Do you still have this converted AT -supply
I might need one !

Let me know !

Greetz

Hi marsjell ,
Many thanks for your reply.

I have the room but i'd prefer a kind of "long" one or If the high is lower than on a normal psu. it's because i want to integrate it in my plexi case.
(see automp3.de 2 give u an idea how many place there's in the case).

tnx

Felix

Raas,

like arby, I also reused my primary side of the AT version... if you like I could build a new prim.side circuit, I'm not sure but I think I still have the rewound transformer & secondary side lying around so all I need for a working AT is the prim. side

I don't have a lot of time on my hands so it would take quite some time, or if you like I could send you the transformer & sec. side so all you have to do is solder the circuit which isn't difficult.

let me know!

Marsjell,

I'm very happy we can work something out !

What do I need else if you would send me the (modified?) transformer and sec.side ?

I have a bunch of old supplies lying around here.

TIA
Greetz,

Hey Felix, I just remembered an url (I'm sick I know....)
http://www.richterfelix.de/netzteil/

this was mend for you!!!

1) in german (your preffered language right?)
2) www.richterFELIX.de/netzteil!!!!

I can't imagine something suiting you better

/Off-topic/

Felix,
I noticed that you're using a KNC-1 radio/TV card,
how are you using this? I'm trying to hack into the card and so far I can only readout all the RDS data (RDS, RDStext, and stationinfo), but I just can't find out how to readout the frequency-info, so when I search manually I can't see which station I'm listening to if it doesn't have a clear RDStext or worse, when I'm looking for a specific station, I have no clue where I am( frequency that is )

cheers

I use the card only for TV and it's not the RDS card
-Sorry-

But like it has WDM driver you should normally be able to get the freq-infos via this . I'm not a programmer.
Another possibility is to write to KC-one and ask. I did the experience that if you get the right person you can get all info you want
On the RDS - ( AF ) info you should also get the actual frequency if my memory about RDS specs is good.

Are you coding yourself an app ? if yes would it be freeware ?

Felix