M2-ATX hard shut down everytime Please help
Installed my pc yesterday and have read everything about the M2 I could find and still canít understand why the hard shut down right after I turn the key off. Iím hoping some one can point out something simple I over looked and make me look like an idiot.
Voom pc 2 Case
Jetway C7, PCMCIA, 1gig DDR2, 160gig 2.5 Sata, Slot load DVD, 8 Gig CF
Running Windows XPpro & Centerfuse.
Regarding the wiring (Iíve check it 3 times and had my buddy check it also)
The following numbers come from the plug that connects to the PSU
Power from battery with engine off is 11.2
Power from battery with engine on is 13.4
Power from ignition source with engine off is 1.3
Power from ignition source with engine on is 13.4
I have the rmt going to two amps. (works just fine)
Iíve tried a few Jumper setting on M2-ATX it currently on mode 7 with jumpers on A,B and C and J8 is connect to the power switch on the MB.
The MB has ACPI enabled with a 4 second delay.
The power setting in windows is
Hibernate enabled. And there is a total of 2.5 gigs of free space and only 948 required to Hibernate.
When I press the power switch button on my computer. The action is Hibernate.
Please help because this hard shut down is going to drive me nuts.