Opus 150 wotn shut down the computer for 20 mins
Hey, I just received an Opus 150 watt psu from a member here, and i stated bench testing it with another pc psu powering the opus.
I read the manual and it stats no jumper means 10 second delayed turn off, so i removed the jumper that was previously installed on pins 1/2 (20 minute delay)
What happens is as soon as power is connected to the red wire, The psu turns on (Regardless if the remote turn on yellow wire is receiving 12v or not)
But, If I connect the yellow wire to the 12v the computer stays on and all is well, until I disconnect the yellow wire and it doesnt shut down until 20 mins later even though i removed the jumper it still takes the psu around 20 mins for it to finally shut down?
Do i have to reset the psu or something somehow to make it realize the jumper was removed?