12v Regulated at 3A
Whats the best way to go about doing this? I was looking at dropping a 15" screen into the boot and want to know how to power it. They need 12V at about 3amps. I came up with a couple of ideas but not really confident with any of them.
1. Just leave it and hope it can hack it at 13.8v (obviously not really an option)
2. Power it of an inverter (too expensive really for what i'm after)
3. Modify a sproggy (one of the newer ones, not going to get a T6 just for this) to only give off 12V
4. Something else...
i'm running a 15" samsung screen with a modified sproggy supply, using just the 5v and 12v sections... i was little ´worried about the 12v part cause i guess spoggy can only supply 1,2A on the 12v line and the original supply forthe lcd says 5V 2a and 12V 2A but it works great !
do a search of the forums, you will find many many threads on this very topic
Originally Posted by doig