ITPS and PW-70a wiring pics
In this picture of the ITPS:
Cable 1 has 3 wires into it (white, red, black). This is what I think you are saying to do with them.
Black: Ground to chassis
Red: Constant 12v power (battery/head unit)
White: Switched 12v power (ACC on head unit/cig lighter)
Cable 2 I assume is the wire that I will use the connect the ITPS to the power supply. Is this correct? And if so, how do I connect it to the power supply? do I cut the plug off and connect the red wire and black wire to corresponding wires on the power supply?
Here is the power supply:
I assume that when I mount in the car, I will cut off the 12v adapter plug off of the grey/black wires.
Black: (wire 1) will be grounded to the chassis
Grey: (wire 2) will be connected to the ITPS (how and to which ITPS wires (red or black or both)
Also, the power supply only has one FDD power connector and one HD power connector. I will need to power a 2.5" HD and a slim-line DVD drive from this power supply. How is this done? The slim-line to IDE adapter has a power cable comming out of it. Do I just plug this into the HD power cable. Do I just cut the connectors off of the HD and FDD power wires and use the 12v rail (the RED wires) from both as 12v power lines?
Also, where do I power the 7" Lilliput. Do I connect that the the power supply? If so how?? or do I find another 12v wire in my car and splice into that??