itps auto power on not working
just got my itps in last friday, and everything seemed great. but after i wired everything up, i ran into some problems. first the system would boot as soon as it got power, and shut off when the itps sent the power signal. this was simple to fix, i just had to disable the power loss auto boot stuff in bios. after this, it just stopped booting completly. i checked the lines going into the system, and they're at 12v. after messing with it for a while, i dug around and found an old power switch (ripped from one of my previous systems). when i connect that in and press it, the system starts. when i plug the itps switch header in, it doesnt. anyone ever had this problem before?