Results 1 to 2 of 2

Thread: opus 12v rail???

  1. #1
    Newbie
    Join Date
    Oct 2004
    Posts
    52

    opus 12v rail???

    I just got my brand new opus installed and its not working. The LED on the opus tells me that the computer is booted up but the computer wont boot up. However, the led on the mother board does come on (no fans or any other components come on). I tested the power supply with a volt meter and the 5v rail is good, but the 12v rail has no power. I am guessing its a bad power supply, but what else could it be?

  2. #2
    Newbie
    Join Date
    Oct 2004
    Posts
    52
    Just to let everyon know, I fixed the problem. I was on the phone with opus tech support and he had me take the cover and fan off to test some points on the board with a multi-meter. As soon as I took the cover off it powered up. Turns out that one of the parts that's soldered onto the board was touching the side of the case. I notched the case out and then called opus to let them know about it so that hopefully they wouldnt make the same mistake with more of the power supplies

Similar Threads

  1. switched +12V for LCD, amp & opus?
    By Saurk in forum Power Supplies
    Replies: 3
    Last Post: 07-22-2004, 05:10 PM
  2. Opus Dcx2.1215.xpc $210 150w 12v
    By Bastien in forum Power Supplies
    Replies: 0
    Last Post: 04-14-2004, 02:42 PM
  3. Using 12v plug for power to OPUS???
    By slffl in forum Power Supplies
    Replies: 3
    Last Post: 03-18-2004, 02:31 AM
  4. No 12v Device+PW120a v Opus 90w
    By zvi in forum Power Supplies
    Replies: 0
    Last Post: 02-03-2004, 01:06 PM
  5. replaced MAX chips and still 12v on 5v rail
    By surfer6262 in forum Power Supplies
    Replies: 5
    Last Post: 07-15-2002, 12:51 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •