Results 1 to 4 of 4

Thread: [b]please Help, Opus Problem And A Very Different One [/b]

  1. 11-22-2004, 12:30 PM #1
    naveedh
    naveedh is offline
    Constant Bitrate naveedh's Avatar
    Join Date
    Oct 2004
    Posts
    195

    Please Help, Opus Problem And A Very Different One

    I have had this opus approx. 2-3 week from when it arrived on my door, iv installed it on a p4 2.4ghz micro atx mobo and a 2.5 inch hd. I had it working but later it wouldnt turn on my pc and would just turn on the front led. It makes my mobo give a buzz from its speakers and i am getting power from the +5v rail. Please help as i bought this PSU from this site and am waiting for Zip-locks reply but want to make sure if anyone has experianced this and how they dealt with it.
    Reply With Quote Reply With Quote
  2. 11-22-2004, 12:41 PM #2
    ColdPhreze
    ColdPhreze is offline
    Constant Bitrate
    Join Date
    Oct 2004
    Posts
    137
    Earlier in another post, you mentioned that you shorted the 12v and 5v rails. Likely that is the cause of the trouble, and you will need to get a new one.

    I originally read that in the thread below, but I see now that the thread has been edited and no longer mentions that.
    Another opus problem

    ColdPhreze
    14" LCD, EPIA MII-10000, 256MB, Wireless LAN, GPS, CDRW/DVD, ELM Scan,
    200wRMS inverter (for the screen), CarPC Pro v2.4 Power Controller,
    2 12" Pioneer Premiers, Sony 6x9s, Sony Xplode Class D mono block, Pheonix Gold A/B amp for highs
    Reply With Quote Reply With Quote
  3. 11-23-2004, 01:51 PM #3
    naveedh
    naveedh is offline
    Constant Bitrate naveedh's Avatar
    Join Date
    Oct 2004
    Posts
    195
    sorry i didnt specify that correctly, it was suppose to be about my PW-120 not the opus, sorry but i do have this problem with the opus as well but my PW-120 powers a diff. mobo and works but the opus doesnt work on any mobo/
    Reply With Quote Reply With Quote
  4. 11-23-2004, 03:56 PM #4
    Grayscale
    Grayscale is offline
    Clover Grayscale's Avatar
    Join Date
    May 2004
    Location
    Arkansas
    Posts
    1,549
    Send a message via AIM to Grayscale
    hey if you shorted rails on your pw-120 theres fuses that are surface mounted that you can solder back together and all will be well. therer are 3 of them. and you should probably put new fuses in to be on the safe side. i just put solder over the two sides of the fuse and bridged it together on the one i blew
    CarPC install is starting to come along again...
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules