Opus150w+hibernation=blue Screen Of Death
Well, I've been posting these power issues now for a long time, and everyday I try to test out and examine my system a bit closer to try to resolve the issues. When I initially installed the Opus, I thought all my problems were solved. In fact, the problems changed. Now, when I shut down my car (and computer) everything works fine approx. every 6 times in a row. But then the next time I restart my car, I does not even attempt to come out of hibernation mode, and just boots up normally to the windows boot screen, and then right into the blue screen of death with the unmountable boot volume note. I'm using Frodoplayer with the ls-1 skin. Now....from extensive research on this site, I gathered info regarding the gauge of the wires and that too thin may cause problems. I do believe that the wire is very thin (I don't recall the gauge), but If this in fact is true, then why would my pc power up and shut down correctly most of the time. Or can it be something else I'm overlooking. Finally, When I had my ITPS and PW-70a, the system would simply shut down when I was approaching a light, put the car in park, or parked and rolled up the window. Now with my Opus150W, it will sometimes reboot while I'm driving (and this can happen whether I'm speeding up or slowing down. It doesn't seem to matter. And the hard thing is that when thins does happen, I have no time to see the flashing led, because I'm driving and it's in the back. Any other ideas on how I can resolve this issue?? Thanx in advance!!