Results 1 to 6 of 6

Thread: which one...

  1. #1
    Newbie
    Join Date
    Jan 2007
    Posts
    6

    Which Power supply to use with p3

    I am sorry for posting this but I am just unsure exactly which power supply for me will be effecient. I am building my CarPC for pretty much Navigation VIDEO and MP3. I have my software already set up on a donor laptop for testing. I used to do work on a few computers and I thought to myself that a Compaq Deskpro EN (small form factor) would be perfect for my setup.
    Its a small case and design plus its a PIII so its not going to draw a lot of power or heat. My next and really ONLY concern is the power supply. I know if I got one of these in my hands I would understand a lot more but I am just unsure of what power supply i would need. the only accessories I am going to run is onboard video, onboard audio and a USB GPS. I really cant think of anything other than that maybe a Wireless card but that would be it. I live in Columbus, Ohio and there is not a whole lot of Wireless networks that I am going to pick up anyway. So if someone could help me out with what power supply with startup/shutdown controller i would need I would really appreciate it.. THANKS in advance.

    JIM

  2. #2
    Neither darque nor pervert DarquePervert's Avatar
    Join Date
    Apr 2004
    Location
    Elsewhere
    Posts
    13,797
    Welcome to our madness...

    I highly recomend checking out the FAQ Emporium here:
    There are informational and instructional write-ups compiled by the membership here.

    Here's one that will help you in your quest for the right DC-DC PSU: http://www.mp3car.com/vbulletin/the-faq-emporium/
    FAQ: Will <insert PSU model> Power Supply work with my system?
    Have you looked in the FAQ yet?
    How about the Wiki?



    Under normal circumstances, a signature would go here.

  3. #3
    Newbie
    Join Date
    Jan 2007
    Posts
    6
    I have definately went through the Faq and read all of that information. My problem is that there is no PIII listed on Chris Hare's "PROCESSOR ELECTRICAL SPECIFICATIONS" sheet. is there any other way that i can figure out which wattage my processor is going to require?

  4. #4
    FLAC strohj's Avatar
    Join Date
    Aug 2004
    Location
    Pearland
    Posts
    1,345
    I would suggest you get the OPUS 150w or the M2-ATX... those should supply plenty of power for you now and even later on when you add stuff to the carpc
    Pentium 4m 1.5GHz|MB896|Roadie Extreme|XM-Direct|Rikaline 6010|T-View 7"|Streetdeck|160gb Western Digital|1Gb DDR2-533 Ram

  5. #5
    Newbie
    Join Date
    Jan 2007
    Posts
    6
    Thank you

  6. #6
    Neither darque nor pervert DarquePervert's Avatar
    Join Date
    Apr 2004
    Location
    Elsewhere
    Posts
    13,797
    Quote Originally Posted by JYahn View Post
    I have definately went through the Faq and read all of that information. My problem is that there is no PIII listed on Chris Hare's "PROCESSOR ELECTRICAL SPECIFICATIONS" sheet. is there any other way that i can figure out which wattage my processor is going to require?
    At the top of the page, there are links to current processors and older model processors.
    Have you looked in the FAQ yet?
    How about the Wiki?



    Under normal circumstances, a signature would go here.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •