FreeFone 1.3 Full integration with Roadrunner

**Enforcer** · 02-08-2009, 11:01 AM

Originally Posted by brandensin

ok.. i made a step further.. now ff connects my phone... only thing that works now is it tells me when there's an incoming call... that's about it... none of the buttons in ff works to receive an incoming call...... i have to open the flip of my phone to receive a call....

I can dial and make a call as well.. so, upto this point, two things of ff can be used with my phone... it tells me there's an incoming call and i can make a call.. that's about it..

If it's not allowing you to answer the call from within FF then it means we need to find out what the AT command to answer a call from your phone is.

The default with FF is ATA (have a look in settings.ini)

To find out will take a bit of trial and error, three ways I can think off hand.

1. try connecting to your phone with HyperTerminal and send different AT commands at it and see what response you get (probably best to do it while ringing the phone)

2. I think RRMobile came with a small program to go through a whole load of AT commnds looking for what response it got.

3. See if you can find a manlal or something online which lists the AT commands for your phone.

**brandensin** · 02-08-2009, 07:18 PM

ok... i am about to give up on this... as guino pointed out... other than what i accomplished.. Non of the other functions are working.. no contact, no receiving, no hang up, no missed... etc......... Man, i thought i was gonna see some sunshine when my computer was able to connect to my phone.. but, that's all that was..

I couldn't find at command for my phone on google... Looks like not much demand or need for this type of infos...

This would be one of the coolest feature for carpc if working...

**bemenaker** · 02-08-2009, 07:25 PM

It seems the newer phones are not responding to AT commands. You need a hands free blue tooth setup. I have yet to fully resolve this myself.

**sgtpepperaut** · 02-08-2009, 07:58 PM

i tried putting the signalstrenght indicator (swf) on top of a nother skin but all it shows is a black box unfortunately. Is there a way to display the indicator in other skins such as in the top bar of Enforcers idrive skin...

thx phil

**Enforcer** · 02-08-2009, 08:52 PM

Originally Posted by brandensin

ok... i am about to give up on this... as guino pointed out... other than what i accomplished.. Non of the other functions are working.. no contact, no receiving, no hang up, no missed... etc......... Man, i thought i was gonna see some sunshine when my computer was able to connect to my phone.. but, that's all that was..

I couldn't find at command for my phone on google... Looks like not much demand or need for this type of infos...

This would be one of the coolest feature for carpc if working...

Connect to your phone via hyperterminal, and type at+clac it should then list the commands it can handle

**Enforcer** · 02-08-2009, 09:02 PM

Originally Posted by sgtpepperaut

i tried putting the signalstrenght indicator (swf) on top of a nother skin but all it shows is a black box unfortunately. Is there a way to display the indicator in other skins such as in the top bar of Enforcers idrive skin...

thx phil

try adding

F02,622,015,19,20,"Foneind.swf"

to the top.skin

**djchicago** · 02-12-2009, 12:33 AM

for window mobile cells use this. http://www.jaylee.org/remotecontrol/. this program controls winamp not the RR. I have my treo 700wx setup to lower the music when the phone rings, pause the music when in a call. I can fast forward and rewind with my phone, I can control the winamp volume, or the windows mixer volume from the phone.THe only thing I can not control is the HD radio (changing stations)

**rizaydog** · 02-14-2009, 05:06 AM

Ok, Im stumped. I have a motorola w376g bluetooth phone. I have a Belkin F8T012 bluetooth dongle. It came with version 5.1 cd. I installed the software and pluged in the dongle when it asked me to. I setup a serial port and audio gateway with the wizard. I paired the phone and pc. That worked fine. However, I cant get ff 1.4 standalone to connect. I looked under device manager and tried every port that said anything about bluetooth. Which one of these should I use? I didn't see any dun port like some of you have talked about.

Here is a pic of my bluetooth places

here is my settings

Any help you could give me would be greatly appreciated.

**guino** · 02-14-2009, 06:09 AM

Originally Posted by rizaydog

Ok, Im stumped. I have a motorola w376g bluetooth phone. I have a Belkin F8T012 bluetooth dongle. It came with version 5.1 cd. I installed the software and pluged in the dongle when it asked me to. I setup a serial port and audio gateway with the wizard. I paired the phone and pc. That worked fine. However, I cant get ff 1.4 standalone to connect. I looked under device manager and tried every port that said anything about bluetooth. Which one of these should I use? I didn't see any dun port like some of you have talked about.
Here is a pic of my bluetooth places

Any help you could give me would be greatly appreciated.

Right click on the serial port icon shown on the image above and see which com port it's associated with. Put that in the INI and make a log file. If the phone isn't answering in that port.. then the port is just a generic communications port for applications on the phone to talk to applications on the PC (no good for us). In that case try connecting through the DUN (Dial-Up Profile) and it will install a MODEM in device manager: set the INI with the COM port that the MODEM is setup and make a debug log again.

**rizaydog** · 02-14-2009, 06:45 AM

My com port is 18 but it still doesn't work. I can pair the phone and pc but ff keeps searching. Here is my file:

How do I find the DUN to connect to? I've looked in device manager and bluetooth places and cant find anything. In device man I found this bluetooth lan, but it has Location 131072 (Bluetooth_Device). No com port to enter into ff??