which command is triggered first
I haven't spent too much time with this pluggin. The newest updates are hard for me too test since I dont have a GPS in the house and testing things in the car are pretty tedious.
Anyway, I will give this version a shot and see what I can come up with. Very intersted in this GPS thing. This will be pretty helpfull.
Anyway the initial test was done my using a NMEA log I received from someone to test the GPS part of trafficams (still yet to be released) played on one PC and received by the development PC.
If you can get an NMEA log when you are travelling, have two PC's and a NULL modem cable then I can supply a program that will send the NMEA log to the COM port on one PC then you can run RR and RRgas on the second.
If you don't have a program to get the NMEA log, then I can supply a program to do that as well.
Sheeet I don't know. (Let me look at the code).
if the website reports that "dealer data is not available" then RRGASNODATAAVAIL will be sent to RR, and then RRGASDONE will be sent.
it does not send RRGASNODATAAVAIL if it can't read the webpage, that is something else I will add later when I work out what other things can go wrong.
E, I should be able to try and get you the debug log later today, when I get to the car computer (it's morning here now)
If you could get me an NMEA log of you driving around your area it would be nice
Here is what I did to get one or the other not both. RRGASDONE or RRGASNODATAAVAIL
Code:"RRGASSEARCHING","BYVAR;VOICESAY;<<TALK;Gas Updating||WAIT;2" "RRGASDONE","BYVAR;NOGASINFO;GASCOMPLETED||SETVAR;NOGASINFO;0" "RRGASNODATAAVAIL","SETVAR;NOGASINFO;1||BYVAR;VOICESAY;<<TALK;No information for zipcode entered" "RRGASAUTOZIP","SETVARBYCODE;GASCODE;CURRENTZIP||rrgas_newcode" "GASCOMPLETED","BYVAR;VOICESAY;<<TALK;Gas Update Complete"
2001 S10 ZR2
Chucks Skin - to old
Slider will only work in 1.4.1 (ie the latest one I pm'd you) make sure you are running that one.
I'll upload updated BMV2 and iDrive skins later tonight with examples of the slider, new buttons and exectbl.ini commands
I have tryed the 1.4.1 release and my slider does not work either. Here is the code.
Ths is with the last official release, not mitch's as there are no solid sliders in it.
I am using the release I recieved friday.
/, Y, Back Slider file path
/, S, x, y, w, h, x1, y1, w1, h1, O, Style, Pointer file path, h2, Code;SLIDERCODES, Tooltip
heres the code I got,
I tried a similar code to MGD as well